Tag Archives: standard

Ask the Experts: Microbiological Contamination in Cannabis & What You Should Look for

By Cannabis Industry Journal Staff
4 Comments

Testing cannabis and cannabis derived products for microbiological contamination should be a straightforward conversation for testing labs and producers. However, a patchwork of regulations and a wide variety of perspectives on what we should, or should not, be looking for has left much of the cannabis industry searching for reliable answers.

Organizations like the AOAC are taking the first crack at creating standardization in the field but there is still a long way to go. In this conversation, we would like to discuss the general requirements that almost all states share and where we see the industry headed as jurisdictions start to conform to the recommendations of national organizations like AOAC.

We sat down with Anna Klavins and Jessa Youngblood, two cannabis testing experts at Hardy Diagnostics, to get their thoughts on microbiology testing in the current state of the cannabis industry.

Q: What are the biggest challenges facing cannabis testing labs when it comes to microbiology?

The CompactDry Yeast and Mold Rapid plate provides fast results.

Anna Klavins & Jessa Youngblood: For microbiology testing, it comes down to a lack of standardization and approved methods for cannabis. In the US, cannabis regulation is written on a state-by-state level. As a result, the rules that govern every aspect of bringing these materials to market is as unique and varied as the jurisdiction writing them. When we are speaking specifically about microbiology, the question always comes back to yeast and mold testing. For some, the challenge will often be centered on the four main Aspergillus species of concern – A. terreus, A. niger, A. fumigatus, and A. flavus. For others, it will be the challenges of total count testing with yeast, mold, and bacteria. These issues become even more troublesome by the lack of recognized standard methodology. Typically, we expect the FDA, USP, or some other agency to provide the guidelines for industry – the rules that define what is safe for consumption. Without federal guidance, however, we are often in a situation where labs are required to figure out how to perform these tests on their own. This becomes a very real hurdle for many programs.

Q: Why is it important to use two different technologies to achieve confirmation?

Dichloran Rose Bengal Chloramphenicol (DRBC) Agar is recommended for the enumeration of yeasts and molds.

Klavins & Youngblood: The push for this approach was borne out of the discussions happening within the industry. Scientists and specialists from across disciplines started getting together and creating groups to start to hash out problems which had arisen due to a lack of standardization. In regards to cannabis testing, implementing a single method for obtaining microbiology results could be unreliable. When clients compared results across labs, the inconsistencies became even more problematic and began to erode trust in the industry. As groups discussed the best way to prove the efficacy of their testing protocol, it quickly became apparent that relying on a single testing method was going to be inadequate. When labs use two different technologies for microbiology testing, they are able to eliminate the likelihood of false positives or false negatives, whichever the case may be. In essence, the cannabis testing laboratories would be best off looking into algorithms of detecting organisms of interest. This is the type of laboratory testing modeled in other industries and these models are starting make their way into the cannabis testing space. This approach is common in many food and pharma applications and makes sense for the fledgling cannabis market as well.

About Anna Klavins

Anna Klavins earned a Molecular and Cellular Biology B.S. degree from Cal Poly San Luis Obispo while playing for the Cal Poly Division I NCAA women’s tennis team. Since joining Hardy Diagnostics in mid-2016, she has gained experience in FDA submissions [510(k)] for class II microbiology in vitro devices. She has worked on 15 projects which led to a microbiology device becoming FDA cleared. She has recently begun participating in the AOAC Performance Tested Methods program.

 

About Jessa Youngblood

Jessa Youngblood is the Food, Beverage and Cannabis Market Coordinator for Hardy Diagnostics. A specialist in the field of cannabis microbiology for regulatory compliance, she is seated with the AOAC CASP committee working on standard methods for microbiological testing in cannabis and hemp. She also sits on the NCIA Scientific Advisory Council as well as the ASTM Cannabis Council.

Content sponsored by Hardy Diagnostics.

SC Labs Develops Comprehensive Hemp Testing Panel

By Cannabis Industry Journal Staff
No Comments

SC Labs, a cannabis testing company with roots in Santa Cruz, California, announced this week that they have developed a comprehensive hemp testing panel that covers a number of contaminants on a national regulatory level. In the press release, the company says they aim to fill the void of national hemp testing requirements.

The hemp testing panel they have developed purportedly meets testing standards in states that require contaminant levels below a certain action limit. The SC Labs hemp testing panel could theoretically be used for regulatory compliance testing across the country, reaching action limits and analyte levels that meet the strictest state requirements.

The panel tests for pesticides, heavy metals, microbiology, mycotoxins, residual solvents and water activity.

The panel is one sign of progress on the long road to nationally harmonized testing standards. “As an industry, we’ve been advocating for national, standardized, and transparent testing regulations for years now,” says Jeff Gray, CEO of SC Labs. “The government has been slow to respond so we decided it was time to act. As an industry, we’ve been advocating for national, standardized, and transparent testing regulations for years now. The government has been slow to respond so we decided it was time to act.”

SC Labs is headquartered in Santa Cruz, but has licenses in California, Oregon, Texas and Colorado (pending). Their California and Oregon locations are both ISO 17025-accredited and conducting THC-containing cannabis testing, as well as hemp testing.

GMPs & Cannabis Manufacturing

By Kathleen May
No Comments

Editor’s Note: While CIJ typically omits the word “marijuana” where possible due to antiquated nomenclature and prejudicial connotations, we understand the legal distinction between cannabis containing THC and hemp requires the use of the word when referencing federal government policies and legislative language.


Despite the rapid evolution of the cannabis industry, the assurance of safe manufacturing practices remains unclear.Both the Food and Drug Administration (FDA) and the Drug Enforcement Administration (DEA) have imposed significant hurdles for cannabis operators to remain on the “right side of the law.” Therefore, manufacturers of both hemp and marijuana products have been left to figure things out on their own, or choose to ignore existing guidance because the lack of federal oversight allows them to do so. Inconsistent regulation on manufacturing, packaging, labeling and testing of cannabis products offers the potential for unsubstantiated, non-scientific and often times blatantly false claims on product safety and efficacy.

Science vs. Law

Hemp and marijuana are both species of the Cannabis family, Cannabaceae. Genetically they are identical but are arbitrarily defined by the presence of delta-9 tetrahydrocannabinol (THC). While science does not differentiate between hemp and marijuana, the law does.

The hemp industry declared a small victory with the passing of the Agricultural Act of 2014 (2014 Farm Bill). Under this bill universities and state agriculture departments were allowed to grow hemp under state law. Additionally, “industrial hemp” was officially defined by establishing the legal limit of THC at 0.3% on a dry weight basis. The Agricultural Improvement Act of 2018 (2018 Farm Bill), under the guidance of the United States Department of Agriculture (USDA), took things a few steps further by authorizing the cultivation of hemp and removed hemp and hemp seeds from the CSA. The bill however provides no language that mandates the safe manufacture of hemp-derived consumer goods. The 2018 version also preserved the FDA’s authority to regulate products containing cannabis and cannabis-derived compounds under the Federal Food, Drug, and Cosmetic Act (FD&C Act). To the surprise of most, listing cannabidiol (CBD), even hemp-derived, as an ingredient on consumer product labels remains illegal under the bill. Furthermore, CBD product manufacturers are not protected under the current regulations. Since 2015 the FDA has issued warning letters to firms marketing CBD products as dietary supplements and/or foods, and in December 2018, FDA declared it illegal to introduce food containing CBD (or THC) into interstate commerce, regardless if it is derived from hemp. To date, the only FDA approved CBD product is GW Pharmaceutical’s Epidiolex.

Marijuana remains classified as a Schedule I controlled substance under the CSA. Thirty-six (36) states have approved comprehensive, publicly available medical marijuana programs, and now 14 states have approved adult use programs, with New Jersey passing legislation on February 22, 2021. However, the industry has seen minimal movement toward mandating GMP requirements in the marijuana market. Only a handful of medical programs require manufacturers to follow GMP. Furthermore, the requirements are inconsistent between states and the language in the regulations on how to approach GMP implementation is vague and disjointed. This fragmented guidance supports the complexity and difficulty of enforcing a coherent, standardized and reliable approach to safe manufacturing practices.

What is GMP and Why Should You Care?

Good Manufacturing Practices (GMPs) are a system for ensuring that products are consistently manufactured and controlled according to quality standards and regulatory guidelines. The implementation of a GMP compliant program ensures consumer health and safety, allows manufacturers to understand the intended use of their products, allows manufacturers to defend product specifications as being appropriate, considers the risks to vulnerable populations and minimizes overall business risk. In a nutshell, GMP equals product safety and quality, and defines the responsibilities of the manufacturer to ensure consumers are protected from the distribution of unsafe and ineffective products. Currently, the GMP “landscape” in the cannabis space is complicated. The various “flavors” (food, dietary supplements, cosmetics and drugs/devices) of GMP leave many confused and frustrated when making the decision to implement GMP. Confusion is a result of unclear regulatory requirements as well as operators not fully understanding how to classify or designate the end use of their product(s). Implementing an effective GMP program requires proper planning (both short and long term), financial commitment and qualified resources.

Where Should You Start?

As the regulatory landscape continues to evolve and mature in the cannabis space, your business model must consider GMP implementation if you wish to remain successful and sustainable.

Intended Use

Before you can implement GMP you must first understand what GMP regulations apply to the intended use of your product(s). Are you manufacturing food, beverages or dietary supplements? Get acquainted with the FDA Code of Federal Regulations (CFRs) on GMP. 

Conduct a Gap Assessment

A gap assessment allows you to determine your deficiencies in relation to GMP compliance. The assessment should include, but is not limited to facility design, equipment design, supply chain, risk management and employee training.

Develop an Action Plan

Once the gap assessment is complete a comprehensive action plan will be developed to map out the steps required to achieve GMP compliance. The action plan should follow the SMART Goal principles:

  • Specific (simple, well-defined)
  • Measurable (meaningful)
  • Attainable (achievable, agreed upon)
  • Relevant (resource-based, reasonable and realistic)
  • Timely (time-based, defined due dates)

The plan will include prioritized deliverables, due dates and allocated resources in order to strategically plan and execute and complete the required tasks.

Schedule a Mock GMP Inspection

A mock inspection verifies that the action plan was adequately executed. Hire an experienced resource familiar with related GMPs and QMS to conduct the inspection. A successful mock inspection is a perfect litmus test if the end goal is to achieve GMP certification.

Cannabis manufacturers that ignore the obvious progression toward an FDA-like industry will not survive the long game. Those that embrace the momentum and properly plan to mitigate product and business risk – those who demonstrate integrity and are truly in this space to ensure safe, effective and quality products to consumers will come out on top, gain credibility and secure brand recognition.


References:

  • 21 CFR Part 111, Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements.
  • 21 CFR Part 117, Current Good Manufacturing Practice, Hazard Analysis, and Risk-Based Preventive Controls for Human Food and the Food Safety Modernization Act (FSMA).
  • 21 CFR Part 210, Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs; General.
  • 21 CFR Part 211, Current Good Manufacturing Practice for Finished Pharmaceuticals.
  • 21 CFR Part 700, Subchapter G-Cosmetics.
  • 21 CFR Part 820, Subchapter H-Medical Devices; Quality System Regulation
  • Congressional Research Service, FDA Regulation of Cannabidiol (CBD) Products, June 12, 2019.
  • United States Food and Drug Administration-Warning Letters, Current Content as of 02/19/2021.

Links:

Advancements in Extraction & the Growth of the Concentrate Category

By Dr. Dominick Monaco
No Comments

Due to quick progressions in legalization, today’s cannabis industry bears little resemblance to the industry of five years ago. As the cannabis space gains mainstream acceptance, it resembles more “traditional” industries closely. In turn, how we consume cannabis has changed dramatically within this novel legal framework.

A brief visit to a cannabis dispensary quickly illuminates just how much the industry has changed in the past few years.

Within the dynamic of modern cannabis, perhaps no vertical has seen the same advancements as cannabis extracts. It’s precisely the growth of the concentrate category that has given rise to the many branded products that define the legal market.

To give a clear picture of how advancements in extraction have stimulated the concentrate category’s growth, we put together this brief exploration.

Standards & Technology

extraction equipmentBefore legalization, the production of cannabis extracts was a shady affair done in clandestine and often dangerous ways. Especially concerning BHO (Butane Hash Oil), home-based laboratories have long since been notorious fire hazards. Even more, with a total lack of regulation, black-market extracts are infamous for containing harmful impurities.

In the few short years that cannabis has been legal in Nevada, Washington and other states, extract producers have adopted standards and technology from more professional arenas. By borrowing from the food and pharmaceutical industries, concentrate companies have achieved excellence undreamed of a decade ago.

Good Manufacturing Practices

One of the essential elements in the extracts vertical advancements is the adoption of good manufacturing practices. According to the World Health Organization website, “Good Manufacturing Practice (GMP) is that part of quality assurance which ensures that products are consistently produced and controlled to the quality standards appropriate to their intended use.”

When adult-use cannabis was legalized in markets such as Colorado, cannabis companies were able to come out of the shadows and discuss GMPs with legit businesses. In doing so, they implemented professional controls on extract manufacturing in accordance with “quality standards” of state regulatory agencies.

Supercritical CO2 Extraction

As cannabis businesses adopted GMP from other industries, extract producers also embraced more sophisticated technology. Of these, supercritical CO2 has pushed the cannabis concentrates vertical into the future.

IVXX processingAccording to the equipment manufacturer Apeks Supercritical, “CO2 is considered to be a safer method of extraction because the solvent is non-volatile. The extract is purer because no trace of the solvent is left behind. It is also versatile and helps protect sensitive terpenes, by allowing cold separation.” By deriving methods from food production, supercritical equipment manufacturers have given cannabis companies a viable option for the commercial production of extracts.

Supercritical technology has helped push the concentrates vertical forward by providing a clean and efficient way to produce cannabis extracts. Nonetheless, supercritical CO2 equipment is highly sophisticated and carries a hefty price tag. Producers can expect to pay well over $100,000 for commercial supercritical CO2 extraction setup.

Products

Just as standards and technology have evolved in the cannabis extracts vertical, we have also seen products rapidly mature. Notably, the legal environment has allowed manufacturers to exchange ideas and methods for the first time. In turn, this dialogue has led to the development of new products, like isolates and live resin.

Isolates

Just as the name implies, isolates are concentrates made from a singular, pure cannabinoid. In today’s market, CBD isolates have grown increasingly popular because people can consume pure CBD without ingesting other cannabinoids or plant materials, including the legal 0.3% THC found in hemp.

Isolates are made by further purifying cannabis extracts in the process of purification, filtration and crystallization. As seen with other concentrates, isolates are used as the base for many cannabis products, such as gummies.

There is also growing interest in CBG isolate, which is another non-psychoactive cannabinoid when consumed orally.

Live Resin

The cannabis concentrate live resin has taken the industry by storm over the past few years. Live resin is a form of extract that is originally sourced from freshly harvested and frozen cannabis plants. The primary selling point behind this extract is the fact that fresh flowers produce much more vibrant aromas and flavors than dried cannabis. Interestingly, this pungency is tied to the preservation of terpenes in live resin.

Just a few of the dozens of various products types on the market today.

To make live resin, producers “flash freeze” fresh cannabis plants immediately after harvest. Valuable cannabinoids and terpenes are then extracted from the fresh, frozen plant material using hydrocarbon solvents. This whole process is done at extremely cold temperatures, ensuring no thermal degradation to the precious and volatile terpenes.

In lieu of these intricate steps to preserve the flower and extracts, live resin has continuously gained popularity. Namely because vaping with live resin is the best way to sample fresh cannabis terpene profiles in its most authentic fashion

It is amazing to see how much cannabis extracts have grown and progressed with legalization. Due to such amazing advancements in standards, technology, and products, the concentrates category has exploded on the dispensary scene. In today’s market, flowers have been largely sidelined in favor of concentrate-based products like gummies. These products now adorn dispensary shelves in beautiful packaging replete with purity and testing specifications.

It’s an often-overlooked fact that the purity standards of the legal extracts have made reliable cannabis brands possible in the first place. You cannot develop a cannabis brand without consistent products that customers can rely on; all things considered, it can be said that advancements in extraction have not only stimulated the concentrate category but the entire industry as we know it today.

extraction equipment

The Hidden Costs of Non-Compliance for Consumers

By Mark Slaugh
No Comments
extraction equipment

Anyone owning and operating a cannabis business should know the value of proactive compliance management to operate successfully. For consumers, the view into the world “behind the budtending counter” is limited to the cool looking packaging, test results and the overall “vibe” of products they may want to try.

In our experience, as the oldest cannabis compliance firm, we’ve audited and visited hundreds of facilities and have seen the proverbial “Wizard behind the curtain”. We know “how the sausage is made.” And, as one can expect, it’s not always as glamorous in the back of the house as it appears on the shelf.

As markets expand and people buy into existing or new cannabis businesses, amid a world of thousands of competing companies and products, consumers need to ask themselves: “What do I know about the companies and products I consume?”

More and more, the question of consistent quality keeps coming up in the cannabis industry. Recalls are still ongoing in the news as products continually fail testing for potency and contamination.

Colorado, for example, is considered the shining jewel of the US industry in terms of experience, quality and integrity. However, consumers may be shocked to learn that a majority of dispensaries in the state do not operate by stringent SOPs, nor do they verify packaging and labeling for compliance, or review test results of products coming in and going out of their shops.

Starting January 1, 2021, these retailers finally have to develop and implement recall procedures in the event of contaminated products or cannabis that is causing adverse side effects. Later this year, vape pens will finally have their vapor tested instead of just the concentrate therein.

These liabilities or lack of compliance infrastructure may very well be a ticking time bomb no consumer in their right mind would want to deal with.

Bad Product/Brand Experience

Non-compliance and inconsistency on the part of operators translates directly into negative experiences for consumers. Whether its consuming a product that tastes like chlorophyll or enjoying a product the first time only to find a completely different experience the next time around, consumers experience the cost of non-compliance the most.

Beyond products, most consumers recognize their brand experience when shopping for products. Since the invention of Weedmaps, customers have always expressed their like or dislike for particular dispensaries and delivery services. Operators know these reviews from a customer’s experience can make or break their business and brand.

We always tell cannabis operators that a brand is a double-edged sword. As easily as it can strike through competitors, it can just as easily damage one’s own business.

Examples include SweetLeaf and Kushy Punch whose brands, once well-known and popular, are now synonymous with the worst of the worst given their histories of non-compliance and shut downs.

For consumers, finding consistent, quality products at a fair price is often the most important consideration to avoid the cost of a bad experience with cannabis. For visitors or first-time consumers, this could mean the difference between trying cannabis again or deciding it’s simply not for them.

Contamination & Illness

control the room environment
Preventing contamination can save a business from extremely costly recalls.

The worst-case scenario for consumers, especially patients, is the cost of consuming contaminated products or otherwise having adverse effects from the use of cannabis. While cannabis itself is one of the least harmful substances known to man, contaminated cannabis can be dangerous or deadly.

In the early days of the industry and in many emerging markets with poor to no oversight, these lessons are learned most severely. From the use of non-commercial washing machines being used for water-based extracts that tested positive for E. coli to recalled products ladened with Eagle 20 (which contains the harmful pesticide known as Myclobutanil), the industry has been reactive to safety measures and complying with best practices.

Still, some states persist with limited to no testing and simply label products with a warning to consumers that they are using cannabis at their own risk without testing for safety or efficacy.

Most consumers may be shocked to know that most cannabis companies do not adhere to good agricultural practices or good manufacturing practices (GAP/GMP) to ensure consistent quality and safety standards in similar industries such as nutraceuticals and food manufacturing.

Patients already weakened by disease states including auto-immune disorders  are most at risk and understand all too well the costs of hospitalization, medical bills and loss of quality of life. For the average adult user, these risks are the same and there is often little to no recourse with the dispensary or product manufacturers if the product slips through contamination testing because of the non-compliance of product validation on flower or infused products.

For companies, outdated and inaccurate SOPs as well as production batches are the only line of defense to protect the company from product liability lawsuits filed by consumers in the event of contamination and illness. Most cannabis companies do not manage this aspect of their business effectively and simply assume they are sufficiently compliant without proactively measuring such compliance and adjusting operations as necessary.

Long-Term Consequences

Consumers would do well to remember that the modern industry is infantile in its development compared to other heavily regulated industries. Cannabis companies are babies learning to crawl while major food and beverage, pharmaceutical and nutraceutical, and alcohol and tobacco industries are far ahead of the game. The US industry, is arguably, already behind the compliance curve comparative to other nations already placing stricter regulations and standards on licensees.

For customers, this can be a confusing experience given that no two batches of flowers will taste the same let alone give a consumer exactly the same effect.

Already, customers are learning Sativa and Indica are imaginary cultural terms to describe generalized characteristics of major and minor cannabinoids and terpenes in each strain which produces a variety of effects – despite state limitations on labeling these active ingredients.

Vape pens are under increasing scrutiny as regulators discover long-term effects of vape use from the tobacco industry causing EVALI in consumers and being deemed as dangerous. As with anything new, the data and science simply aren’t there to truly tell customers what the effects may be over the long run. It has taken decades for tobacco, as an example, to go from doctor-recommended to carcinogenic.

Consistency in quality standards requires meticulous SOPs

Similarly, Big Cannabis of the future may be facing similar concerns that aren’t being warned about currently on their products and consumers could face unknown long-term consequences. In no way is this a condemnation of cannabis and early research shows cannabis is much safer than either alcohol or tobacco.

The point is to emphasize that over the long run, compliance is key to tracking the consistency and safety of products to avoid long-term liability and costs on consumers. Consumers would be wise to gravitate towards compliant brands and companies that focus on consistent quality and safety to minimize potential long-term negative impacts and costs.

Accountability & Transparency

Customers must first understand where the buck stops and who is responsible for what as it applies to cannabis and the cannabis products they consume. This can vary between states from vertically integrated models to horizontal models which allow for independent businesses to buy and sell cannabis between each other.

In the case of cannabis, the restrictions on METRC and other state “seed to sale” tracking systems make it nearly impossible for customers to return products and unclear on how to file complaints.

METRC and other seed to sale systems dictate that dispensaries must be able to track originating sources of cannabis back to another licensed facility. As such, once the consumer buys a faulty vape pen, for example, it’s gone from the dispensary inventory. Bringing it back in physically creates non-compliance issues for the dispensary as they cannot virtually account for the physical addition back into inventory.

No one ever said making sausage was a pretty or easy process. That’s why most consumers don’t want to think about how it’s done.

This example is a simple one to showcase the importance of compliance in the cannabis business and the complexities businesses must go through to operate. What is more applicable and important for consumers to understand is how non-compliance and inconsistency can affect them negatively beyond messy fingers from leaky vape carts.

extraction equipment
Consumers should ask cannabis companies about their product quality standards

These types of unexpected issues represent significant costs for cannabis operators in recalls, fines, lawsuits and fees which is what most people think the “costs of non-compliance” mean.

However, and in addition to the literal cost mandated by regulation, there are the costs owners don’t think about: in the time and fees charged by the professionals to solve these issues, the time and stress spent on production, the increase or decrease in supply, mitigating product liability, and brand recognition and damage due to poor quality or recalls.

All of these factors simply drive up the costs of products for consumers and decrease the reliability of finding consistent, quality products and brands that customers can count on.

As we always say at iComply:

“It is always more cost-effective to be proactive, rather than reactive, when it comes to operational cannabis compliance management.”

Consumers would be wise to recognize which companies are proactive in managing their compliance. And companies would be wise to get ahead of these customer costs by being the proactively compliant companies that consumers want and need.

Surprise! A Major Cannabis Stakeholder Pushes for Ethical Marketing Standards

By Jeff Baerwalde
No Comments

As more nations across the globe embrace the benefits of legal cannabis, to say the business is booming is an understatement. But with cannabis going corporate in a big way and marketing standards still hit or miss, the reality of unethical marketing practices that manipulate consumers and run roughshod over small businesses threatens to do harm if not brought under control.

Enter Cresco Labs, a major player in the international cannabis industry. Contrary to what you might expect, and bringing in a breath of fresh air, this giant is pushing to install marketing standards that protect the ethical interests of all cannabis businesses.

In this article, we will take a look at some key elements of ethical advertising in the cannabis industry and explore the Cresco Labs proposal.

This dispensary ad appeared on Variety.com

The Power of Advertising

Advertising is a powerful medium for rebranding and influencing public perception. The messages conveyed by ads reflect the changing moral, ethical, and consumer opinions of society – and often create them in the first place. For cannabis, an industry rife with stereotypes, ads present a strong opportunity to change the popular face and perception of cannabis as nothing more than a vehicle to get high.

Today’s numbers tell a different story with a full 19% using it for pain relief and another 37% to relax. Even one successful ad campaign can change the mind of a skeptical consumer. So how to ethically harness this power?

Cannabis rebranding generally works best when it draws on four main elements:

  • Emphasize health and wellness benefits. Most new customers who are interested in cannabis these days are attracted by the inspiring health and wellness possibilities that cannabis products present. By redefining cannabis as a medical product suitable for families, the elderly and patients suffering from various ailments, and not simply as a way to get high, cannabis companies can target the audiences that will most benefit from their products.
  • Replace typical “juvenile” imagery with sophisticated graphic design approaches. With so many options for how to use and consume cannabis these days, it is no wonder that brands are embracing trendy, sophisticated, contemporary design techniques. Logos featuring minimalist and elegant fonts more accurately express the narrative behind products such as cannabis teas, cannabis-infused oils and edibles.
  • Highlight the science behind the products. For those naysayers still determined to limit cannabis to its recreational usages only, to the exclusion of its many health benefits, exploring the science is vital. By citing legitimate research studies and findings, and explaining the scientific processes at play when using cannabis, ads can debunk false myths while educating the public.
  • Tell a compelling, relatable story. Like all good advertising, the narrative is key to engaging audiences. Framing cannabis within the powerful context of a compelling story is a strong approach to making a memorable impact on consumers.

Wild West Advertising

Because cannabis is such a new industry, only recently becoming legal in many states (and countries), advertising agencies have been reticent to sign on with these companies. The lack of regular advertising standards means that cannabis advertising has been compared to the “wild west,” where anything goes. While some companies struggle to promote a more wholesome, consumer-friendly image of cannabis, marketing to broad audiences, other companies embrace stoner stereotypes and industry myths, often resulting in ads that depict unethical content.

An example of a warning letter the FDA sent to a CBD company making health claims

Unofficial social media ads may target underage customers, with slogans featuring symbols like Santa Clause, or presenting underage people in their ads next to cannabis products, as in a recent Instagram ad from one brand, Dogwalkers. The ad shows a person holding a pre-rolled joint on the beach with a caption that reads “let the good times (pre) roll.” The image also features young-looking surfers in the background, an implied invitation to underage consumers to sample these products.

Without regulation, businesses are also free to create advertisements rife with false claims. Vulnerable people, patients with chronic illnesses, senior citizens and others may be susceptible to the claims presented in these ads. The FDA has recently begun to crack down on this spread of misinformation, but putting in place industry-wide advertising standards would also have a strong effect.

Cresco Standards

Operating in nine states in the U.S., Cresco Labs is a vertically integrated, publicly traded company that has recently released a proposal for establishing marketing rules for the cannabis industry. The proposal, entitled “Responsible Advertising and Marketing Standards for the U.S. Cannabis Industry” outlines a vision to hold the U.S. cannabis industry to a higher professional and ethical standard than is the current norm, thus legitimizing the industry.

Some specific rules in the proposal stipulate that ads depicting over-consumption as a fun or desirable outcome should violate industry standards. Additionally, the widespread adoption of this proposal would ban any marketing approaches that target underage consumers, ensuring that companies are better able to enforce legal age restrictions.

The company, alongside other large cannabis organizations, has released this proposal as part of an attempt to normalize the industry, allowing it to bring in top ad companies to help promote their brands. While cannabis retains the pop culture imagery of stoner culture and its associations with reckless behavior and teenage cannabis usage, regular advertising sources will remain skeptical about getting involved.

Changing Tides

As the industry continues to evolve and expand, more regulation will be useful in terms of establishing dominant narratives to help redefine how cannabis appears in the popular imagination and what kind of clientele is attracted to cannabis products. But by redefining the acceptable standards of advertising, there is also a risk that cannabis will lose some of the intrigue and novelty that currently makes it a popular, trending topic.

Still, if rebranding campaigns can shift the story so that cannabis appeals to the masses, then everyone in the cannabis industry ultimately benefits.

Leaders in Extraction & Manufacturing: Part 2

By Aaron Green
No Comments

Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the second article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands. Click here to see Part 1.

In this week’s article we talk with Matthew Elmes, director of product development at Cannacraft. After cutting his teeth in academic and industry research, Matthew was approached by Cannacraft leadership to bring a new perspective to their product development efforts. The interview with Matthew was conducted on July 22, 2020.

Next week, we’ll interview Joaquin Rodriguez, chief operating officer at GenX BioTech. Stay tuned for more!

Aaron Green: Hi Matthew, and thank you for taking the time to chat today, I understand you have a busy schedule!

Matthew Elmes: Thanks – yeah, last week was pretty insane!

Aaron: Well, I’m happy we found a chance to put this together. Let’s start from the beginning. How did you get involved at Cannacraft?

Matthew Elmes, director of product development at Cannacraft

Matthew: I did my Ph.D in biochemistry at Stony Brook University on cannabinoid intracellular transport and metabolism. I then did a post-doc with Artelo Biosciences in endocannabinoid system modulation. While I was doing my post-doctoral research, Dennis Hunter, co-founder of Cannacraft, had learned about my work and reached out to offer me a position.

Aaron: Awesome, that’s a great feeling when people are reaching out to you! The next questions here will be focused on product development and manufacturing. What is your decision process for launching a new product?

Matthew: We do our best to anticipate what the market will want. A lot of our new product development comes from improving our current products. Things like improving stability, shelf-life and reducing bitterness. For brand-new products and technologies, we first get a lot of feedback from the marketing and sales teams and will then go into a planning session to decide what is feasible and what is not prior to moving forward.

Aaron: Do you personally get involved in manufacturing? Tell me about your process there.

Matthew: I do get involved in manufacturing. My main inputs are figuring out how much cannabis oil to use to hit a target potency around the size of a batch. This is the type of thing I do for all our beverage products like HiFi Hops, our Satori line of infused edibles, and the various gummy products sold under our brands Absolute Xtracts and Care By Design.

Aaron: Are you developing new products internally?

Matthew: For the most part we develop everything internally. We are very vertically integrated here at Cannacraft and we extract all of our oil in house. I don’t do the oil extractions myself. Most of our stuff is supercritical carbon dioxide extraction, but we have hydrocarbon and cryoethanol extraction facilities opening soon. For our gummies, we use distillate oils for the best flavor and for our droppers/vapes we use full-spectrum oils for a more sophisticated array of effects.

Aaron: In product development, what does getting stuck look like for you?

Matthew: Getting stuck happens a lot! You know, strict regulations make it challenging to source ingredients. Foods we’d like to source for a product are often too high in pesticides or heavy metals for the cannabis regulations. What’s good enough for the grocery store is very often not good enough to be compliant in the California cannabis industry. Fruits that are totally free from pesticides are hard to find. Our edibles brand Satori Chocolates actually might be the only player in the entire California cannabis industry that uses real whole fruit in our products rather than something artificial or a processed fruit paste. We actually had to source our strawberries from Italy to find ones that were both compliant in metals/pesticides and tasted good enough to meet our high standards! The same sort of challenges apply to sourcing biomass for oils.

Aaron: If you get stuck is it usually the same place? Or is it different each time?

Matthew: We’re so diversified. We have lots of different products. The process for each one can have its own issues. The problems you encounter with cannabis beverages are not the same ones that you’ll encounter with vapes, edibles, topicals or sublinguals, etc. We are one of the oldest players in the California cannabis industry (CannaCraft was founded in 2014, well before regulated recreational cannabis was a thing) so we have the advantage of working on all these issues for years longer than most of our competitors and we have largely figured out all the major ‘kinks’ already. A big part of it is also that we have assembled a great team of food scientists, chemical engineers, chemists, legal and regulatory experts, all with diverse specialties that allows us to quickly address any new ‘stucks’ and be fully confident in all of our products.

Aaron: Feel free to answer the next question however you like. What does your magic helper look like?

Matthew: I would love a magic helper! What would a magic helper look like to me? I think my magic helper is a recent undergrad with lab experience. I would have them take care of a lot of the quality and lab day to day activities. My responsibilities often make me too stuck to the computer screen where I don’t have time to get to all the experiments that I’d like to do…a trained magic helper could physically perform those experiments for me!

Aaron: OK, and now for our final question! What are you following in the market and what do you want to learn about?

Matthew: I am personally really interested in yeast grows and cannabinoid synthesis from biological organisms. We stick to only natural plant-derived cannabinoids for all our products, but it’s a new field that’s just fascinating to me. I also think that minor cannabinoids will have a bigger place in coming years. In particular I have my eye on THCV, ∆8-THC, CBG and THCP. THCP is a phytocannabinoid that was just discovered a year ago and exhibited very potent effects in preclinical models, but no one has been able to produce and purify it in appreciable amounts yet. We already manufacture and sell a ∆8-THC vape cart under our ABX brand, but for the others keep an eye out for new product announcements from us that are on the horizon.

Aaron: Well, that brings us to the end of the interview Matthew, this is all awesome feedback for the industry. Thanks so much for your time and insights into product development in the cannabis industry.

Matthew: Thanks, take care!

The Changing Landscape of CBD in the UK

By Mike Barnes
4 Comments

Reports estimate that up to 8 million people in the UK use CBD for its variety of wellness benefits. The market is currently worth £300 million, a figure which is expected to more than triple in the next five years.

Sales of CBD already outstrip those of Vitamin C at £301 million vs £119 million and given that almost 90 percent of users in the UK purchase CBD online, new investments into omnichannel and e-commerce capabilities are likely to lead to even more growth.

Yet, for all this excitement, the truth is the UK’s CBD industry is facing a bit of a roadblock.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

Until this year, CBD has been in a period of regulatory uncertainty and the industry faced understandable criticism when high profile cannabis probes found that over half of the most popular CBD oils did not contain the amount of CBD promised on the label. On February 13, 2020, the Food Standards Agency (FSA) unveiled new plans to better regulate the industry and announced a deadline of March 31, 2021 for the submission of a valid application for novel food licence for businesses selling food and food supplements containing CBD in the UK. Contained in the announcement was a warning to all CBD companies that failure to comply may result in products being taken off the shelves.

Consumers are also advised by the FSA to “think carefully” about taking CBD, and not to consume more than 70mg a day, making the UK the first country in the world to set recommended limits for CBD consumption, despite no scientific basis for the 70mg recommended limit.

Whilst it is undeniable that the CBD market requires some form of regulation and standards need to be raised for CBD products, to ensure consumers are receiving safe, legal and quality products, this will be a complex and costly process. CBD companies, particularly smaller CBD brands, will need to ensure they have the necessary infrastructure, expertise and resources to meet this deadline.

The deadline is fast approaching, and no extension has been granted despite of the difficulties caused by COVID-19. This will put all businesses under pressure, as the process for applying for Novel Food status requires supplying a large amount of data from rigorous testing. For larger players, this will likely be nothing more than a costly inconvenience, but for smaller, nascent businesses, these costs may put their longevity at risk. There are hundreds of CBD start-ups which have done great work to future-proof their businesses and create safe, high-quality products. Now, instead of preserving costs to try and stay afloat during the pandemic, these businesses must put a significant amount of precious resource and funds into finalising their applications in time.

Improving end user confidence in CBD products and understanding the process from seed to shelf is crucially important in this developing industry, however, I firmly believe these regulations are suffocating the market. I fear that on April 1, 2021, many smaller firms who haven’t managed to achieve Novel Food status yet have a superior product, will suddenly find themselves unable to legally trade.

On the other hand, there is the argument that the FSA ruling may increase the importation of CBD products from firms based outside of Europe. So far, the large cannabis firms in North America, which have the budget and expertise to meet FSA standards, have held back on importing CBD products to the UK. This may well have to do with the slightly dubious legal status CBD has so far had in the UK, so it will be interesting to see whether this changes in April next year and which players will enter the market. The CBD market will continue to grow and diversify but it will be essential that this leads to increasing consumer choice rather than confusion.

In my opinion, the only way the UK will be able to fully harness the potential of CBD is to create an independent, self-sufficient industry that not only helps consumers but contributes to the wider economy through jobs, skills and investment. The pandemic has done well to put a spotlight on the huge access issues cannabis patients face in the UK, bolstering the case to ‘onshore’ the industry.

Whilst this would require a streamlining and simplification of the licensing laws around growing cannabis, the development of a UK-based industry would have endless benefits. Not only would medical cannabis patients see improved access to their medication, CBD firms would no longer have to ship oil in from the dominating wholesale nations such as Poland, Czechia and Italy, this in turn having huge economic benefits. The development of a UK industry should involve the creation of a new regulatory system specifically designed for cannabis products and preferably for a new regulatory body, similar to the Office of Medicinal Cannabis in the Netherlands, to oversee all cannabis regulation, licensing, importation and approvals. This would mean a move away from the current solution of forcing CBD products into the Novel Food category and subjecting them to inappropriate regulations which will soon begin to smother the market with unnecessary red tape.

People are increasingly turning to more natural health and wellness solutions, so as Britons become better informed about CBD products and as the market matures, demand will certainly increase. Yet with both Brexit and standardisation of cannabinoid regulations occurring in parallel, the future and scale of the CBD market is still to be determined. A huge UK market could potentially help push it in a positive direction, facilitating processes for CBD producers.

The cannabis industry is resilient and until this point, has managed to grow at an exponential rate despite regulatory uncertainty. As acceptance and demand continues to increase, so the case for an independent UK industry will strengthen and regulatory roadblocks finally overcome.

Could CBD Standards Become Global?

By Marguerite Arnold
No Comments

Here is the good news: There are beginning to be regional- and country-specific guidelines on at least one widely grown cannabis crop internationally. This includes a range of regs on the medical side (GMPs) but they are also expanding for the “other” cannabis crop too. Namely, hemp.

Now, here is the bad news: The regulation that is developing in different regions is frustratingly not uniform, and can still differ greatly in critical areas. Most notably, for some reason, while the U.S. Farm Bill of 2018 created a new national standard for the amount of THC that could be contained in American hemp crops (0.3%), the same conversation in Europe during the same period of time led to a decision to set the level of allowable THC in hemp plants and products at a slightly lower one: 0.2%. As a further confusing muddle, Switzerland has set its THC limits at 0.1% (Switzerland is not in the European Union), and other countries across the region have also attempted to limit the THC in industrial hemp production to no more than this level, no matter what regulators rule at the EU level.

Just some of the many CBD products on the market today.

Beyond a lack of scientific reasoning obvious in the same, by definition, this creates a natural trade barrier between hemispheres. If U.S. farmers are looking for export opportunities to Europe (for example) not to mention other states, they have to worry about both local as well as destination standards – which on the surface at least, are currently incompatible.

It is also creating some frustrating issues for anyone who is in the market for hemp as either a buyer or seller.

Other Issues In The Mix
Markets are driven by many factors – including regulations but also cost and of course consumer demand for a product within a certain price range. Certainly, the CBD industry if not the recreational THC one right behind it (even in Europe now) desperately wants to attract those who are known euphemistically as “daily consumers.”

This means that both the price point and consumer opportunities must hit a mainstream distribution norm. While the recreational market will continue to be distorted by delayed, but inevitable discussions about reform across Europe, the medical market is beginning to set some groundwork that is also bleeding into the entire discussion. Namely, that extracts will play a large role here.

What does this wrinkle mean in a world where the agricultural cultivation standards are different?

Biomass And Extracts Are Gaining In Importance
For those in the strictly “flower” game, the market at least in the U.S., will remain a place where pretty flower crops will gain premium prices as long as they meet local spec.

european union statesHowever, this is a limited proposition, even now – especially in the CBD business. The edibles market, for one, has created a huge potential for vast quantities of industrially produced, outdoor grown hemp, bound for extraction and downstream, a vast variety of end products across a wide spectrum of niches – from wellness to purely cosmetic. So is the burgeoning medical market in Europe.

This means two things. The first is that consumer-facing products with any amount of cannabinoid (take your pick) can be produced to order, no matter the cannabinoid concentrations of the original plant. The second, by definition, means that biomass bound for extraction, particularly export, will gain an increasingly larger share of the wholesale market.

Does it really matter, in other words, to a European extractor, that the source product is of higher THC concentrate than is allowed for B2C sale in Europe? No. Indeed, all it means is that they have to buy lower amounts of biomass. The rest is merely a mechanical problem.

Playing The Regulatory Game
For an increasingly competitive hemp market in the United States, in other words, foreign exports are absolutely an intriguing option for revenue right now, and will continue to be as long as price competitiveness and overall quality issues remain high. Furthermore, there will be almost no pressure to regulate the market globally to the same standards, particularly if CBD itself is descheduled in December by the WHO.

In other words, the regulatory disconnect between the U.S. and Europe right now, and certainly for certain kinds of unfinished bulk product, could therefore open a new niche in the market that is unlikely to be “fixed” anytime soon.

ASI Global Launches Cannabis Safety & Quality Audit Standards

By Cannabis Industry Journal Staff
No Comments

According to a press release published July 1, ASI Global Standards announced the launch of their newest audit standard: the Cannabis Safety & Quality Scheme (CSQ). The scheme is built around ISO requirements and the Global Food Safety Initiative (GFSI) requirements.

With input from a number of stakeholders in the cannabis space, the CSQ scheme is designed for the cannabis industry and by the cannabis industry. Each standard was developed by industry professionals and stakeholders, like growers, manufacturers and processors, to meet market, consumer and regulatory requirements from seed-to-sale.

The CSQ scheme is built on four standards:

  • Growing and Cultivation of Cannabis Plants
  • Manufacturing and Extraction of Cannabis
  • Manufacturing and Infusion of Cannabis into Food & Beverage Products
  • Manufacturing of Cannabis Dietary Supplements

There is a public comment period in effect now, and those wishing to provide input have until July 31 to do so. If certification bodies or accreditation bodies want to find more information and get involved in the CSQ certification or accreditation process, they are encouraged to reach out via email at info@csqcertification.com.