Just over a month ago, a handful of dispensaries in New Jersey began selling cannabis to adults over the age of 21. The state issued licenses for adult use sales to seven alternative treatment centers (ATCs), otherwise known as medical cannabis businesses already established in the state. In total, thirteen dispensaries in the state started selling cannabis to adults over 21.
The seven companies awarded adult use licenses were Ascend, Curaleaf, GTI, Acreage, Verano, Columbia Care and TerrAscend. The state’s roll out created a lot of controversy over allowing already established, larger medical cannabis businesses and multi state operators to begin adult use sales before smaller businesses and social equity applicants get licensed.
Sales totals in the first month of New Jersey’s adult use market
Earlier this week, the New Jersey Cannabis Regulatory Commission (CRC) held a public meeting where regulators discussed progress, sales totals so far, conditional license applications and more. According to the meeting notes, between April 21 and May 21, retailers in New Jersey did $24,201,875 in cannabis sales with 212,433 transactions. During the meeting, regulators considered 46 conditional license applications and four testing lab license applications.
According to NJ.com, six new dispensaries were awarded licenses to begin adult use sales. Of the six new retail locations, Curaleaf opened their Edgewater location to adult use customers and Ayr Wellness received approval to begin adult use sales at all three of their medical locations in Eatontown, Union and Woodbridge. Ascend and TerrAscend also received approval to begin adult use sales act their locations in Montclair and Lodi, respectively.
About two weeks ago, the CRC testified before the state’s Senate Judiciary Meeting to share progress on the legal cannabis market, just over a year after the CRC was established. Jeff Brown, executive director of the CRC, discussed the agency’s goals and some challenges ahead of them. Brown says the CRC will be focusing on additional rules for adult use, modernizing the medical rules, enforcing regulatory compliance and information sharing in the near future. He also mentioned a couple challenges the industry is currently facing that they wish to address, including: expanding access to capital for entrepreneurs , removing impediments to finding real estate, educating municipalities to open up opportunities for applicants and ensuring medicinal cannabis access is unimpeded by recreational sales.
“We have made great strides in all of these efforts, and when we look at how New Jersey compares against other states, we fair pretty well,” Brown told lawmakers. “Beginning recreational sales on 4/21/22 was an important milestone. But it doesn’t mark the end of the process, it marks an important step in a multi-year effort to establish New Jersey as the premier cannabis market on the East Coast.”
In a press release published this week, AOAC International announced it has partnered with Signature Science, LLC as the test material provider for the new AOAC Cannabis/Hemp Proficiency Testing program. What makes this proficiency testing (PT) program so unique is that AOAC will be the only PT provider to offer actual cannabis flower as the matrix.
This month, the pilot round with twenty cannabis testing labs begins with hemp-only samples being shipped in early May. The first live round of the PT program is scheduled for November of this year and will offer participating labs the choice of cannabis flower samples or hemp samples.
The program will include one sample for cannabinoid and terpene profiles, moisture and heavy metals, as well as a second sample for pesticide residue testing. According to the press release, mycotoxins will be added to the mix soon.
The new PT program was developed by stakeholders involved with the AOAC Cannabis Analytical Science Program (CASP), including state regulatory labs, industry labs, state and federal agencies and accreditation bodies. Shane Flynn, senior director of AOAC’s PT program, says the program is a result of scientists coming to them with concerns about testing in the cannabis space. “AOAC has a long history of bringing scientists together to address emerging topics, so when stakeholders came to AOAC with their concerns and need for quality proficiency testing in the cannabis industry, AOAC acted,” says Flynn. “Stakeholders noted the analytical differences in testing cannabis versus hemp and had specific concerns around it and asked for a program that would provide actual cannabis samples in addition to hemp. This is truly a program that was created by the stakeholders, for the stakeholders.”
AOAC says they plan on introducing microbiology to the PT program, with microbial contamination tests in both cannabis and hemp samples. They are also considering adding additional matrices, like chocolate and gummies.
Signature Science is an ISO 17043 accredited proficiency test provider that also has a DEA-licensed controlled substances lab, making them an ideal candidate to partner with AOAC for the PT Program. They entered into a 3-year MoU with AOAC for the program. Their team developed and validated methods used to create the samples for the PT program at their DEA-licensed lab in Austin, Texas.
Steep Hill, the company that started the first cannabis testing laboratory in the United States, today announced their expansion into Vermont. Their licensee, Steep Hill Vermont, is the first lab in the state to receive pre-approval from the state, according to a press release.
The leadership team is made up of CEO Kos Parulekar, Dr. Mark Scialdone, chief scientist and Callie Chapman, who will be the lab director. Parulekar previously held management roles at General Electric and The World Bank.
Dr. Scialdone will be speaking at the Cannabis Quality Conference & Expo. Click here to learn more. Dr. Scialdone worked at DuPont for eighteen years before joining the cannabis industry and becoming an expert in plant oil extraction, analysis and natural product chemistry. Dr. Scialdone is a member of the ASTM D37 cannabis committee, the NCIA testing policy working group and is a founding member of the cannabis chemistry subdivision at ACS. “We chose to partner with Steep Hill because of their breadth of experience from opening multiple cannabis testing labs across the country that are considered the gold standard for quality results, rapid turnaround time, and impeccable customer service,” says Dr. Scialdone. “Vermont has long had the status of the Humboldt County of the East having a long tradition in cannabis, so opening a testing lab here makes sense on many levels.”
Chapman is a chemical engineer who previously worked for Autumn Harp as their head of cannabis product development. “Working with the State of Vermont, our laboratory plans to expand cannabis testing services, while offering quick turnaround times and educational resources for cultivators, manufacturers, and other industry participants,” says Chapman. “Our goal is to be a key partner in the success of the Green Mountain State’s adult use market and continue to grow our industry.”
Some consumers participating in the legal cannabis market want to avoid inhalable products. They are concerned about the effects of the smoke or they want their usage to be discreet — without the pungent aroma emanating from burning cannabis flower. For those consumers, edibles are the preferred option and a growing product category.
Within the edibles space, the beverage segment — with limited product options in some states — may offer significant potential for growth. In 2021, cannabis-infused beverages accounted for only 1% of total legal cannabis product sales and about 5% of the edibles segment in the United States, reports market researcher BDSA. But cannabis beverage sales are growing around the U.S.
In California, cannabis drinks grew their market share in the edibles category from 4% in 2018 to 7% in 2021. Nevada saw beverages increase their share of edibles revenues from 7% to 10% in the same time frame. And cannabis beverages’ share of edibles sales in Massachusetts went from less than 1% in 2019 to 8% in 2021.
Pegged at $180 million in revenue last year, the cannabis beverage market is projected to reach nearly $500 million by 2026, predicts BDSA.
Today, gummies and chocolate products dominate the edibles category. Although beverages are currently a small segment of edible sales, they may have some inherent advantages — familiarity, faster-acting products from improved bioavailability, and taste and flavor innovations — over other cannabis products. Since beverages can incorporate many different flavors from fruity, cola and sweet to coffee, tea, sour and bitter, these myriad flavor variations can mask or minimize any off-tastes associated with THC.
Viewed as part of their everyday regimen, consumers drink beverages for hydration, nourishment, refreshment and enjoyment. Cannabis beverages are well-suited for consumers’ lifestyles, while gummies and chocolates may be perceived as sugary treats and special occasion items.
Cruise Beverage B Happy Nitro-Infused CBD Drinks.
Brand owners are beginning to recognize the limited availability of products and growth potential of cannabis-infused beverages and are looking to enter the category. Packaging plays a key role in cannabis beverages, with sustainability, regulatory compliance (e.g., child-resistant), labeling compliance (e.g., warning symbols and text), convenience and branding all contributing to the success of the expanding product category.
Sustainable Packaging
Consumers, especially younger generations, are concerned about the environment and support brands that align with their values. According to the 2020 Sustainable Market Share Index from the NYU Stern Center for Sustainable Business, sustainability-marketed products delivered about 55% of the market growth in consumer packaged goods (CPG) from 2015 to 2019 in the U.S. despite being only 16% of the market. Sustainability-marketed goods grew seven times faster than products not marketed as sustainable and nearly four times faster than the overall CPG market.
As a primary consumer touchpoint, packaging is a good way for cannabis beverage brands to show their commitment to the environment. But finding the most sustainable packaging option for a particular application may not always be as straightforward as it seems. Many considerations are involved — material choice (e.g., plastic, glass, or aluminum), recyclability of the material, the weight of the material, recycled content of the final package, package design (minimalist vs. excessive), transportation costs and other factors like reusability.
To help facilitate the process, Berlin Packaging uses life cycle analysis to determine a product’s environmental impact or carbon footprint over its entire life cycle, including sourcing & raw materials extraction (minerals resource use), manufacturing (energy and water usage), distribution (freight miles, fuel usage) and end-of-life (recovery, recycling, reprocessing).
We have the know-how to improve the sustainability of any packaging material — whether it be lightweighting, use of post-consumer recycled (PCR) content, greater recycling rates and more.
Regulatory Compliance
Because legal cannabis products are regulated by individual states and not at the federal or national level, the regulations for cannabis packaging requirements can vary widely from one state to another. However, there are some common rules that all states follow.
Child-resistant capable cap fits snugly over the top of a can.
All cannabis products — including beverages — require child-resistant packaging to meet the standards of the Consumer Product Safety Commission. For aluminum cans, Berlin Packaging offers a child-resistant capable mechanism that fits snugly over the top of a can. Available in polypropylene or a bio-based resin, the single-use device can be custom developed to fit the exact specifications of the customer’s cans. In-stock products are available for standard 202 can ends.
Along with child-resistant capable packaging, states also require some type of warning symbol and statement on the label to indicate the product contains cannabis. Depending on the state, the symbol may be a triangular or diamond shaped in a bright or contrasting color to call attention to it on the label. The symbol typically houses a cannabis leaf image or “THC”.
Convenience
Like any packaged drink, cannabis beverages need to check all the boxes for consumer convenience — easy to drink, portability, cupholder friendly and resealable.
Users can easily reseal PET and glass bottles with continuous thread or lug finish closures, but cans present a challenge. Berlin Packaging offers a solution with a resealable can that opens like a traditional stay-on-tab. Here’s how it works. Lifting the pull tab breaks the tamper-evident band and unlocks the slider mechanism. Pulling the slider opens the can and makes the familiar venting sound — even after reopening.
The configuration of the opening creates a smooth laminar flow to improve the drinking experience. Moving the slider back to its original position and pushing down the pull tab, which produces a clicking sound, reseal the closure. The tamper-evident band remains on the can underneath the pull tab.
Branding
Cannabis beverages come in drops, shots, syrups, carbonated, iced tea, lemonade, fruity, water, sports & energy, mocktails, tea, coffee and hot cocoa.
Because cannabis has been associated with medicinal uses, many consumers use cannabis products to manage their wellbeing and health. Thus, some cannabis products have been positioned to relieve stress, promote relaxation and sleep, reduce pain and inflammation, improve mental focus, enhance mood or simply for indulgence and enjoyment.
Product positioning and the experience the brand owner wants to create for the consumer can help inform the brand design, personality, and narrative or storytelling. It’s also important that the brand design and messaging resonate with the product’s target audience.
Studio One Eleven, Berlin Packaging’s in-house innovation division, can help cannabis beverage marketers with their product branding from concept to commercialization. We offer market research and consumer insights, brand strategy and visual branding design, brand name development, structural package design, and more. Our services are available at no additional charge in exchange for a customer’s packaging business.
Cruise Beverage distributes nitrogen-infused CBD drinks with all-natural ingredients in 12-oz aluminum cans under the B Happy brand. The team at Studio One Eleven helped Cruise Beverage and its B Happy brand tell their story of free-spirited enjoyment with updated branding, expressive flavor names (i.e., Loosen Up Lemon, Peaceful Pear, Mellow Mango, and Blissful Blood Orange), and unique packaging graphics.
Uplifting illustrations speak to the brand’s sense of freedom and relaxation, and the hand-drawn style reflects the craftsmanship of the CBD beverage product. A white background with flavorful pops of color says clean and fresh, while tiny bubble imagery communicates the delightful effervescence of the fizzy drinks.
The Future of Cannabis Concentrates: in Hydrocarbon Extraction & Manufacturing
Michelle Sprawls, Director of Science, CULTA
This presentation delves into closed loop hydrocarbon extraction, what products can you make with this type of extraction method, advancements for manufacturing and new techniques.
Hardy Diagnostics Sponsored TechTalk
Jessa Youngblood, Food and Beverage Market Coordinator, Hardy Diagnostics
Extraction Optimization Through Artificial Intelligence
Dr. Markus Roggen, President & Chief Science Officer, Delic Labs
Attendees can expect to learn about:
Data is the basis for optimization, but which data is important and how to collect it.
What system exist for extraction optimization?
What is Bayesian Optimization, and how does it work?
What are the best parameters for extracting average cannabis?
How the Notorious CO2 Became a Superhero: SFC for Green Cannabinoid and Terpene Purification
Jason Lupoi, Ph.D., Director of Laboratory Operations, Thar Process
Attendees can expect to learn:
Assessment of the ways in which SFC can be used to purify cannabinoids as well as remediate THC from hemp products such that they are compliant with the Farm Bill.
The use of SFC for removing unwanted contaminants from product batches or chemical conversion processes such as those used in making delta-8-THC
The application of CO2 extraction and SFC for terpene refinement.
By Kelsey Cagle, Frank L. Dorman, Jessica Westland No Comments
Sample preparation is an essential part of method development and is critical to successful analytical determinations. With cannabis and cannabis products, the analyst is faced with a very challenging matrix and targets that may range from trace level through percent level thus placing considerable demands on the sample preparation techniques.1 The optimal sample preparation, or “extraction”, method for potency analysis of cannabis flower was determined using a methanol extraction coupled with filtration using regenerated cellulose filters.
In the United States (US), Canada, and other countries where medicinal and/or adult recreational cannabis has been legalized, regulatory entities require a panel of chemical tests to ensure quality and safety of the products prior to retail sales2. Cannabis testing can be divided into two different categories: Quality and Safety. Quality testing, which includes potency analysis (also known as cannabinoid testing or cannabinoid content), is performed to analyze the product in accordance with the producer/grower expectations and government regulations. Safety testing is conducted under regulatory guidelines to ensure that consumers are not exposed to toxicants such as pesticides, mycotoxins, heavy metals, residual solvents and microbial contaminates.
Potency testing evaluates the total amount of cannabinoid content, specifically focusing on tetrahydrocannabinol (THC) and cannabidiol (CBD). In the US, the biggest push for accurate total THC is to differentiate between hemp (legally grown for industrial or medicinal use), which is defined as cannabis sativa with a THC limit ≤ 0.3 %, and cannabis (Cannabis spp.), which is any cannabis plant with THC measured above 0.3 %3. Potency testing is typically performed by liquid chromatography (LC) with UV detection to determine the quantity of major cannabinoids.
In addition to reporting THC and CBD, their respective precursors are also important for reporting total potency. Tetrahydrocannabinolic acid (THCA) is the inactive precursor to THC while cannabidiolic acid (CBDA) is the precursor to CBD.4,5
Methods and Materials
Sample Preparation
All samples were homogenized using an immersion blender with a dry material grinder. The nominal sample amounts were 200 mg of flower, 500 mg of edibles, and 250 mg of candy samples.
Potency Extraction Method (1)
Twenty milliliters (mL) of methanol (MeOH) was added to each sample. The samples were mechanically shaken for 10 minutes and centrifuged for 5 minutes.
Potency Extraction Method (2)
Ten mL of water was added to each sample. The samples were mechanically shaken for 10 minutes. 20 mL of acetonitrile (ACN) was then added to each sample and vortexed. An EN QuEChERS extraction salt packet was added to the sample. The samples were placed on a mechanical shaker for 2 minutes and then centrifuged for 5 minutes.
Each extract was split and evaluated with two filtration/cleanup steps: (1) a regenerated cellulose (RC) syringe filter (Agilent Technologies, 4 mm, 0.45 µm); (2) a PFTE syringe filter (Agilent Technologies, 4 mm, 0.45 µm). The final filtered extracts were injected into the ultra-performance liquid chromatograph coupled with a photodiode array detector (UPLC-PDA) for analysis.
Figure 1: Calibration curve for THC potency
Calibration
Standards were obtained for the following cannabinoids at a concentration of 1 mg/mL: cannabidivarin (CBDV), tetrahydrocannabivarin (THCV), cannabidiol (CBD), cannabigerol (CBG), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), cannabinol (CBN), tetrahydrocannabinol (9-THC), cannabichromene (CBC), tetrahydrocannabinol acid (THCA). Equal volumes of each standard were mixed with MeOH to make a standard stock solution of 10 ug/mL. Serial dilutions were made from the stock to make concentrations of 5, 1, and 0.5 ug/mL for the calibration curve (Figure 1).
Instrumental Method
All instrument parameters were followed from Agilent Application Note 5991-9285EN.8 A UPLC with a PDA (Waters Corp, Milford, MA) detector was employed for potency analysis. An InfinityLab Poroshell 120 EC-C18, 3.0 x 50 mm, 2.7 um column (Agilent Technologies, Wilmington, DE) was utilized for compound separation. The organic mobile phase composition was 0.05 % (v/v) formic acid in HPLC grade MeOH and the aqueous mobile phase composition was 0.1 % (v/v) formic acid in HPLC grade water. The mobile phase gradient is shown in Table 1. The flow rate was 1 mL/min (9.5 minute total program), injection volume was 5 uL, and column temperature was 50 °C.
Table 1: LC mobile phase gradient for potency samples6
Discussion and Results
Table 2 summarizes the relative standard deviations (% RSD) were found for the THC calibrator (at 1 ug/mL) and one extract of a homogeneous sample (utilizing 7 replicates).
Table 2- %RSD values for the instrument response precision for THC in both the calibrations and the homogeneous extract.
The cannabinoid potency of various cannabis plant and cannabis product samples were determined for the various extraction techniques In the chromatograms THC was observed ~8.08 minutes and CBD was observed ~4.61 minutes (Figure 2).
Figure 2: Chromatogram of the 10ug/mL calibrator for potency/cannabinoid analysis
Total potency for THC & CBD were calculated for each sample using the equations below. Equation 1 was used because it accounts for the presence of THCA as well as the specific weight difference between THC and THCA (since THCA will eventually convert to THC, this needs to be accounted for in the calculations).
Table 3 shows the % THC and the total THC potency values calculated for the same flower samples that went through all four various potency sample preparation techniques as described earlier. Figure 3 also provides LC chromatograms for flower sample 03281913A-2 and edible sample 03281912-1.
Table 3-THC and Total THC potency values for the same cannabis flower sample processed through the combination of extractions and cleanups.Figure 3: Potency/Cannabinoid analysis chromatogram for flower sample 03281913A-2 (red trace) and edible sample 03281912-1 (green trace).
The results indicated that with the “Potency Extraction Method 2” (ACN/QuEChERS extraction) coupled with the RC filter provided a bias of 7.29 % greater for total THC % over the other extraction techniques. Since the other 3 techniques provided total THC values within 2% of each other, the total THC of the sample is more likely ~14%.
Since the sample dilution for the above data set reduced the CBD content, an undiluted sample was run and analyzed. This data is reported in Table 4.
Table 4- CBD and Total CBD potency values for the same cannabis flower sample processed through different sample preparation techniques.
The CBD results indicated that with the “Potency Extraction Method 1” (methanol extraction) coupled with RC filter, allowed for a greater CBD recovery. This may indicate the loss of CBD with an ACN/QuEChERS extraction.
With an average ~14% total THC and 0.06% total CBD for a homogenous cannabis flower sample, the optimal sample preparation extraction was determined to be a methanol extraction coupled with filtration using a regenerated cellulose filter. Since potency continues to remain at the forefront of cannabis regulatory testing it is important to utilize the right sample prep for your cannabis samples.
References
Wang M, Wang YH, Avula B, Radwan MM, Wanas AS, Mehmedic Z, et al. Quantitative Determination of Cannabinoids in Cannabis and Cannabis Products Using Ultra-High-Performance Supercritical Fluid Chromatography and Diode Array/Mass Spectrometric Detection. Journal of Forensic Sciences 2016;62(3):602-11.
Matthew Curtis, Eric Fausett, Wendi A. Hale, Ron Honnold, Jessica Westland, Peter J. Stone, Jeffery S. Hollis, Anthony Macherone. Cannabis Science and Technology, September/October 2019, Volume 2, Issue 5.
Sian Ferguson. https://www.healthline.com/health/hemp-vs-marijuana. August 27, 2020.
Taschwer M, Schmid MG. Determination of the relative percentage distribution of THCA and 9-THC in herbal cannabis seized in Austria- Impact of different storage temperatures on stability. Forensic Science International 2015; 254:167-71.
Storm C, Zumwalt M, Macherone A. Dedicated Cannabinoid Potency Testing Using the Agilent 1220 Infinity II LC System. Agilent Technologies, Inc. Application Note 5991-9285EN
As the demand for legal cannabis continues to rise and more states come online, it is imperative to enact more rigorous and comprehensive testing solutions to protect the health of consumers. People use cannabis products for wellness and to find relief; they should not be susceptible to consuming pathogens and falling ill. Especially for immunocompromised consumers, the consequences of consuming contaminated cannabis or hemp are dire. Of course, there should be federal standards for pathogen testing requirements like we have for the food industry. But right now, as cannabis is not yet federally legal, testing regulations vary between states and in many states, testing requirements are too loose and enforcement is minimal. It is up to state legislators, regulators and cannabis operators to protect the health of consumers through implementing more stringent testing.
From the outset, the environmental elements needed to grow cannabis – heat, light, humidity, soil – make cannabis ripe for pathogens to proliferate. Even when growers follow strict sanitation procedures through the supply chain from seed to sale, contaminations can still occur. Cannabis companies need to be hypervigilant and proactive about testing, not just reactive. The lack of regulations in some states is alarming, and as the cannabis industry is highly competitive and so many companies have emerged in a short time, there are unfortunately unscrupulous actors that have skated by in a loose regulatory landscape, just in the game to make a quick buck, even at the expense of consumer health. And there are notable instances where states do not have enforcement in place to deter harmful manufacturing practices. For instance, there are some states that don’t mandate moisture control and there have been incidents of companies watering down flower so it has more weight and thus can be sold at a higher cost – all the while that added moisture leads to mold, harming the consumer. This vicious circle driven by selfish human behavior needs to be broken by stricter regulations and enforcement.
While in the short term, looser testing regulations may save companies some money, in the long run these regulatory environments carry significant economic repercussions and damage the industry at large, most importantly injury or death to customers and patients. Recalls can tarnish a company’s brand and reputation and cause sales and stock prices to tank, and since cannabis legalization is such a hotly contested issue, the media gloms onto these recalls, which opponents to legalization then leverage to justify their stance. In order to win the hearts and minds of opponents and bring about federal legalization sooner, we need safer products so cannabis won’t be cast in such a dangerous, risky light.
Certainly, there’s a bit of irony at play here – the lack of federal regulations heightens the risk of contaminated cannabis reaching consumers, and on the flip side recalls are used by opponents to justify stigmatizing the plant and keeping it illegal. Nevertheless, someday in the not-too-distant future, cannabis will be legalized at the federal level. And when that day happens, federal agents will aggressively test and regulate cannabis; they’ll swab every area in facilities and demand thorough records of testing up and down the supply chain; current good manufacturing practices (cGMP) will be mandated. No longer will violations result just in a slap on the wrist – businesses will be shut down. To avoid a massive shock to the system, it makes sense for cannabis companies to pivot and adopt rigorous and wide-sweeping testing procedures today. Wait for federal legalization, and you’ll sink.
Frankly, the current landscape of cannabis regulation is scary and the consequences are largely yet to be seen. Just a few months ago, a Michigan state judge reversed part of a recall issued by the state’s Marijuana Regulatory Agency (MRA) on cannabis that exceeded legal limits of yeast, mold and aspergillus, bringing contaminated cannabis back to shelves without even slapping a warning label on the packaging to inform consumers of the potential contamination. This is a classic case of the power of the dollar prevailing over consumer safety and health. Even in well-established markets, the lack of regulations is jarring. For example, before this year in Colorado, testing for aspergillus wasn’t even required. (Aspergillus inhalation, which can cause Aspergillosis, can be deadly, especially for people who are immunocompromised). Many states still allow trace amounts of aspergillus and other pathogens to be present in cannabis samples. While traces may seem inconsequential in the short term, what will happen to frequent consumers who have been pinging their lungs with traces of pathogens for 30 years? Consistently inhaling trace amounts of pathogens can lead to lung issues and pulmonary disease down the road. Look what happened to people with breathing and lung issues during the last two years with COVID. What’s going to happen to these people when the next pandemic hits?
We need state regulators and MSOs to step up and implement more aggressive testing procedures. These regulators and companies can create a sea of change in the industry to better protect the health and well-being of consumers. Just complying with loose regulations isn’t good enough. We need to bring shortcomings around testing into the limelight and demand better and more efficient regulatory frameworks. And we should adopt the same standards for medical and adult use markets. Right now, several states follow cGMP for medical but not adult use – that’s ridiculous. Potentially harming consumers goes against what activists seeking legalization have been fighting for. Cannabis, untainted, provides therapeutic and clinical value not just to medical patients but to all consumers; cannabis companies should promote consumer health through their products, not jeopardize it.
For best practices, companies should conduct tests at every step in the supply chain, not just test end products. And testing solutions should be comprehensive. Most of the common tests used today are based on petri dishes, an archaic and inefficient technology dating back over a century, which require a separate dish to test for each pathogen of interest. If you’re waiting three to five days to see testing results against fifteen pathogens and a pathogen happens to be present, by the time you see results, the pathogen could have spread and destroyed half of your crops. So, not only do petri dishes overburden state-run labs, but due to their inherent inefficiencies, relying on these tests can significantly eat into cannabis companies’ revenues. At PathogenDx, we’ve created multiplexing solutions that can identify and detect up to 50 pathogens in a single test and yield accurate results in six hours. To save cannabis companies money in the long run and to make sure pathogens don’t slip through the cracks, more multiplexing tests like the ones we’ve created should be implemented in state labs.
Right now, while the regulatory landscape is falling short in terms of protecting consumer health, better solutions already exist. I urge state regulators and cannabis companies to take testing very seriously, be proactive and invest in creating better testing infrastructure today. Together, we can protect the health of consumers and create a stronger, more trustworthy and prosperous cannabis industry.
With more and more states fully legalizing cannabis for medical and adult use, regulation has become a hot topic for the industry – and it won’t be going away anytime soon. The markets for virtually all cannabis uses (with the exception of industrial hemp, under the Farm Bill) have manifested at the state level without the benefit of federal oversight. One of the biggest consequences of state-based programs has been striking inconsistencies in assuring public safety through the establishment of testing requirements and the licensing of third-party, independent testing laboratories. Establishing legal cannabis programs on a state-by-state basis has been from the ground up. While some states have done a better job than others, it has not been an easy process; one that typically involves adjusting to yearly legislative changes. Third-party independent cannabis testing labs seem like a logical arrangement for public safety and defensibility at the state level given the illegal federal status of cannabis, and while this arrangement has undoubtedly prevented tainted cannabis flower, extracts and products from ending up on dispensary shelves, many caveats from this arrangement have emerged, including fraud.
While most states do require ISO 17025:2017 accreditation, no uniform testing methods nor uniform contaminant testing requirements exist, and they vary considerably. We see this in several examples including the list of pesticides required for screening varying from none to over 66, screening for microbial contaminants varies from a simple presence/absence test for two human pathogens to quantitative enumeration across several enteric and fungal categories and, finally, some states adhere to the American Herbal Pharmacopeia heavy metal limits for herbs, while other states have adopted the more appropriate US Pharmacopeia inhalation limits. Some states require rigorous demonstration of method validation before licensing, while other states hand out preliminary licenses prior to submission and review of validation data packages for each analyte category.
Fraud in laboratory testing facilities is well known in the clinical setting, especially where lucrative Medicare or commercial insurance claims tempt less than honest laboratory managers to falsify results or add tests that were not ordered by a physician costing taxpayers billions of dollars annually. Fraud within cannabis testing labs is not instigated by large insurance payouts but rather by survival within individual markets where competition for clients can be fierce. Cannabis testing fraud ranges from outright collusion of testing labs with growers and producers demanding certificates of analysis (CoAs) with specific, inflated THC numbers to a testing lab handing out sweeping passing marks for contaminants in an attempt to keep clients or steal clients away from a reputable lab not willing to inflate cannabinoid values or pass on the presence of, say, chlorpyrifos, a highly toxic organophosphate pesticide, in extracts or lead in outdoor-grown hemp.
Cannabis testing labs have had little power to influence state legislators or regulators to improve industry oversight and combat fraud. From the outset of a state cannabis program, the growers and producers are placed in the driver seat. They generate the products that end up in dispensaries and generate sales that create the tax revenue that propels the industry forward. A consequence of this hierarchical arrangement has let the growers decide that the concentration of THC equates with value. This translates to the higher the THC concentration, the higher the price both wholesale and retail. Sadly, this also has been taken to mean better products yet with zero medical justification since we know virtually nothing about THC dosing, save for how our endocannabinoid system functions, which is at the nanomolar range. Now the entire cannabis industry is stuck with this unsubstantiated marketing ploy around THC that no one can now seem to escape. It is as if cigarette makers had decided early on to market their brands by how much nicotine each cigarette contained. You can see how this would have quickly led to toxic levels of nicotine.
Where do we go from here? Placing THC content as the primary valuation of cannabis is not an easy problem to solve, as there is little incentive for change. Fraudulent labs provide higher THC numbers, which increases dollars to the growers/producers and state tax coffers fill up. It’s a multi-point problem that will require a multi-point solution:
State regulators could move the focus away from THC by placing limits on the concentration of THC in products, increasing oversight of cannabis testing labs, and requiring unscheduled round-robin testing and annual review of validation data packages.
Growers and producers could place a higher emphasis on public safety and education.
Ultimately, the solution lies with the cannabis consumer through education and awareness. Cannabis end-users need to familiarize themselves with the testing regulations in their state and understand that higher THC numbers does not mean a better or more effective product. Cannabis consumers also need to understand the product on the market may or may not be tested for microbiological contaminants protecting them from pathogens. In many instances, they are paying for higher THC numbers that are not reflected in the product they just purchased.
Until cannabis is federally legalized and therefore given federal oversight, piecemeal, state-by-state regulation is going to continue. How that regulation protects the American consumer is up to the work of the industry and what we continue to prioritize.
According to a press release published last week, Cresco Labs has come to an agreement with Columbia Care Inc. to acquire the company. The $2 billion deal, expected to close in the fourth quarter of 2022, will create the largest multi-state operator (MSO) in the country by pro-forma revenue.
Cresco Labs is already one of the country’s largest MSOs with roots in Illinois. With a footprint covering a lot of the United States, their brands include Cresco, High Supply, Mindy’s Edibles, Good News, Remedi, Wonder Wellness Co. and FloraCal Farms.
Columbia Care is also one of the largest cannabis companies in the US, with licenses in 18 jurisdictions and the EU. They currently operate 99 dispensaries and 32 cultivation and manufacturing facilities. Their brands include Seed & Strain, Triple Seven, gLeaf, Classix, Press, Amber and Platinum Label CBD.
Under the agreement, shareholders with Columbia Care will receive 0.5579 of subordinate voting share in Cresco for each common share they hold. Columbia Care shareholders will hold approximately 35% of the pro forma Cresco Labs Shares once the deal goes into effect.
Coming out of the deal, Cresco’s total revenue will hit $1.4 billion, making it the largest MSO in the country. Their footprint will reach 130 retail dispensaries across 18 different markets. The companies already have the largest market share in Illinois, Pennsylvania, Colorado and Virginia and are of the top three market shares in New York, New Jersey and Florida, which gives them unique opportunities to capitalize on emerging adult use markets.
Charles Bachtell, CEO of Cresco Labs, says the deal is very complementary and they are excited about long-term growth and diversification. “This acquisition brings together two of the leading operators in the industry, pairing a leading footprint with proven operational, brand and competitive excellence,” says Bachtell. “The combination of Cresco Labs and Columbia Care accelerates our journey to become the leader in cannabis in a way no other potential transaction could. We look forward to welcoming the incredible Columbia Care team to the Cresco Labs family. I couldn’t be more excited about this enhanced platform and how it furthers the Cresco Labs Vision – to be the most important and impactful company in cannabis.”
The agenda features breakout sessions, keynotes and panel discussions that will help attendees better understand the cannabis markets in the region and provide insights on best practices and business strategies. The conference will begin with a keynote presentation, then a panel on The Future of East Coast Cannabis: Social Equity, Justice & Legalization. Following that will be a panel on The Standardization State of the Union: Science-Based Resources for Driving Cannabis Safety with an overview of the New Jersey cannabis marketplace to end the first day.
The second day will kick off with a Keynote titled Centering Equity in Cannabis Policy, Quality & Business with Toi Hutchinson, President & CEO at Marijuana Policy Project. Other agenda highlights include:
The State of the State: An Update on New Jersey Legalization by Steven M. Schain, Esquire, Attorney at Smart-Counsel, LLC
Tri-State Cannabis: Pro Tips for Winning Applications by Sumer Thomas, Director of Regulatory Affairs and Russ Hudson, Project Manager at Canna Advisors
Navigating Cannabis Testing Regulations for Multi-State Operations by Michael Kahn, President & Founder of MCR Labs
Keynote by Edmund DeVeaux, President of the New Jersey Cannabusiness Association
A Guide to Infusion Technology | Design Experiences that Inspire and Innovate with Cannabis Ingredients by Austin Stevenson, Chief Innovation Officer at Vertosa
Valuable Analysis Ahead of Asset Acquisition by Matthew Anderson, CEO of Vanguard Scientific
Registration options are available for in-person, virtual and hybrid attendance.
Cannabis industry professionals also interested in the food industry can attend the Food Safety Consortium, which begins on Wednesday, October 19 – Friday, October 21. The program features panel discussions and breakout sessions that encourage dialogue among mid-to-senior-level food safety professionals. The Food Safety Consortium kicks off with an FDA Keynote and Town Hall, followed by a panel on the State of the Food Safety Industry and where it is going, led by Darin Detwiler of Northeastern University.
About Cannabis Industry Journal
Cannabis Industry Journal is a digital media community for cannabis industry professionals. We inform, educate and connect cannabis growers, extractors, processors, infused products manufacturers, dispensaries, laboratories, suppliers, vendors and regulators with original, in-depth features and reports, curated industry news and user-contributed content, and live and virtual events that offer knowledge, perspectives, strategies and resources to facilitate an informed, legalized and safe cannabis marketplace.
About the Cannabis Quality Conference & Expo
The Cannabis Quality Conference & Expo is an educational and networking event for the cannabis industry that has cannabis safety, quality and regulatory compliance as the foundation of the educational content of the program. With a unique focus on science, technology, safety and compliance, the “CQC” enables attendees to engage in conversations that are critical for advancing careers and organizations alike. Delegates visit with exhibitors to learn about cutting-edge solutions, explore three high-level educational tracks for learning valuable industry trends, and network with industry executives to find solutions to improve quality, efficiency and cost effectiveness in the evolving cannabis industry.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
About two weeks ago, the CRC testified before the state’s Senate Judiciary Meeting to share progress on the legal cannabis market, just over a year after the CRC was established. Jeff Brown, executive director of the CRC, discussed the agency’s goals and some challenges ahead of them. Brown says the CRC will be focusing on additional rules for adult use, modernizing the medical rules, enforcing regulatory compliance and information sharing in the near future. He also mentioned a couple challenges the industry is currently facing that they wish to address, including: expanding access to capital for entrepreneurs , removing impediments to finding real estate, educating municipalities to open up opportunities for applicants and ensuring medicinal cannabis access is unimpeded by recreational sales.
