Tag Archives: accredit

Trichome Analytical Accredited to ISO 17025

By Cannabis Industry Journal Staff
No Comments

According to a press release sent out last week, the American Association for Laboratory Accreditation (A2LA) announced the accreditation of Trichome Analytical to ISO/IEC 17025:2017. Trichome Analytical is the first cannabis testing lab accredited to the standard in the state of New jersey.

Based in Mount Laurel, New Jersey, Trichome Analytical is a DEA-registered third-party cannabis testing lab that offers hemp compliance testing for state and federal guidelines.

Kristen Goedde with Trichome Analytical says they are hoping to provide testing for consumer safety and accurate labeling for the state’s new hemp market. “The evolution of the hemp and cannabis industries increasingly demands rigorous, high quality analytical testing,” says Goedde. “Obtaining accreditation is an essential measure for laboratories seeking to ensure consumer safety and reliable labeling. Trichome is honored to have our quality systems validated by A2LA, and we look forward to elevating cannabis and hemp operations to new heights – right here in our home state.”

C4 Labs Accredited, Ready for Compliance Testing

By Cannabis Industry Journal Staff
No Comments

Since Arizona legalized medical cannabis in 2011 , regulators have not required testing for cannabis products. That is about to change in a little more than a month.

After a long and hard-fought battle by patients and stakeholders in the Arizona cannabis industry, Governor Ducey signed SB1494 into law last year, a bill that requires independent labs to test cannabis products for contaminants. More specifically, the bill requires that cannabis products be tested “to determine unsafe levels of microbial contamination, heavy metals, pesticides, herbicides, fungicides, growth regulators and residual solvents and confirm the potency of the marijuana to be dispensed.”

Ryan Treacy, co-founder of the ACLA and founder/CEO at C4 Labs.

Ryan Treacy, CEO/Founder of C4 Labs and co-founder of the Arizona Cannabis Laboratory Association (ACLA), has been a vocal advocate for mandatory product safety testing since 2016. After several failed lobbying attempts and forming the ACLA with three other labs in Arizona, SB1494 finally passed in May of 2019.

Under this bill, the Arizona Department of Health Services has been in charge of building the new laboratory regulations. Those rules include certifying and regulating labs, establishing requirements like health and safety protocols, mandatory quality assurance program and standards, chain of custody and sampling policies, adequate records, accreditation, proficiency testing, among other requirements.

In a press release published by Perry Johnson Laboratory Accreditation (PJLA), they announced that C4 Laboratories was accredited to ISO/IEC 17025 this week, in time for the new requirement in Arizona.

According to Treacy, the Department of Health Services is still in the process of finalizing the technical accreditation for labs in the state. He says C4 Labs will be ready to accept compliance samples in the coming weeks. “There will no doubt be a flood of samples and a lot will be asked of the lab operators to continue to build their business to better accommodate sample volume,” says Treacy. They want to minimize any disruption to the supply chain, keeping patients and clients at top of mind.

C4 Labs has been preparing for the flood of compliance testing samples beyond just their accreditation. “Over the last 16 months we have added a new fully renovated lab space, doubled our lab staff and have invested significant monetary resources in additional state of the art analytical instruments to allow for more analysis and expanded lab sample capacity,” says Treacy. “We intend to make efficiency and capacity our focus while maintaining our commitment to sound science and data integrity for our clients and patients alike.”

C4 Labs is currently in its sixth year of operating and was one of the original labs to serve Arizona patients. “We are very proud of the work we have put in to advocate for safe, lab-tested cannabis products and we intend to continue to lead from the front as Arizona’s premier cannabis testing laboratory.”

ANAB Accredits ABKO Labs

By Cannabis Industry Journal Staff
No Comments

The ANSI National Accreditation Board (ANAB) accredited ABKO Labs, LLC, to ISO/IEC 17025. ABKO Labs is a cannabis and hemp testing laboratory based in Warren, Michigan.

According to the press release, ABKO Labs achieved ISO/IEC 17025 accreditation in Michigan with the help of ANAB. The lab earned the accreditation in general requirements for the competence of testing labs, demonstrating competence in chemistry in microbiology.

“We are very proud of our accomplishments in the cannabis lab space in Michigan and we look forward to continuing to offer accurate and prompt results,” says Amy Brown, CEO of ABKO Labs, LLC.

ASI Global Launches Cannabis Safety & Quality Audit Standards

By Cannabis Industry Journal Staff
No Comments

According to a press release published July 1, ASI Global Standards announced the launch of their newest audit standard: the Cannabis Safety & Quality Scheme (CSQ). The scheme is built around ISO requirements and the Global Food Safety Initiative (GFSI) requirements.

With input from a number of stakeholders in the cannabis space, the CSQ scheme is designed for the cannabis industry and by the cannabis industry. Each standard was developed by industry professionals and stakeholders, like growers, manufacturers and processors, to meet market, consumer and regulatory requirements from seed-to-sale.

The CSQ scheme is built on four standards:

  • Growing and Cultivation of Cannabis Plants
  • Manufacturing and Extraction of Cannabis
  • Manufacturing and Infusion of Cannabis into Food & Beverage Products
  • Manufacturing of Cannabis Dietary Supplements

There is a public comment period in effect now, and those wishing to provide input have until July 31 to do so. If certification bodies or accreditation bodies want to find more information and get involved in the CSQ certification or accreditation process, they are encouraged to reach out via email at info@csqcertification.com.

Deibel Bioscience Rebrands, Achieves ISO 17025 Accreditation

By Cannabis Industry Journal Staff
No Comments

On June 19, Charles Deibel, president and CEO of Deibel Bioscience, announced two important changes to his cannabis testing laboratory: First, they changed their name from Deibel Laboratories to Deibel Bioscience. Secondly, they achieved ISO/IEC 17025:2017 accreditation.

Deibel Labs is an internationally recognized corporation of 15 testing labs in North America that’s been around for about 50 years, serving the food, beverage and personal care industries. Starting in 2018, Deibel has ventured into the cannabis and hemp markets, and recently rebranded these labs as “Deibel Bioscience.” Currently, Deibel Bioscience operates in California and Illinois, with plans underway to open labs in Florida and Pennsylvania.

Charles Deibel, President & CEO of Deibel Bioscience

Deibel’s brand is very well known in the food testing industry and has recently become a prominent voice and industry advocate in the cannabis testing community. Charles Deibel’s father, Dr. Robert Deibel, was a pioneer of the Hazard Analysis and Critical Control Point (HACCP) system. Charles Deibel has a long career in the laboratory testing space and even worked with the Department of Justice to help shape the legal case against Peanut Corporation of America and testified as an expert witness during the trial.

With respect to their accreditation, Deibel Bioscience of California (Santa Cruz) achieved it through the American Association for Laboratory Accreditation (A2LA). The lab’s scope currently holds seven chemical and microbiological test methods as well as their sampling method, with plans to expand their scope to include four more chemical testing methods in the next month.

“At our level of testing services, any lab should be able to offer accurate testing, at a fair price and a reasonable turn-around time,” says Deibel. “These three qualities are no longer defining features; rather it is our high level of service and exceptional Technical Services acumen that set us apart.”

According to Deibel, their company is drawing on decades of experience in other testing industries to provide a high caliber of technical expertise. “We are a family owned and operated corporation and are not constrained by quarterly investor demands. Our size offers economics of scale that is reflected in our service and pricing.”

ACS Laboratory Get Certified for Cannabis Testing in Florida

By Cannabis Industry Journal Staff
No Comments

According to a press release published earlier this week, ACS Laboratory announced the Florida Department of Health Office of Medical Marijuana Use (OMMU) has certified ACS to test products for medical dispensaries in the state.

This certification comes after the Florida Department of Health adopted an emergency rule, requiring dispensaries to only use a certified lab for product testing. Dispensaries (or medical marijuana treatment centers as the state calls them) in Florida have until December 24, 2020 to sell products tested before June 24, 2020.

ACS Laboratory was founded in 2008. They are DEA- and AHCA-licensed, ISO 17025-accredited and CLIA-accredited with the largest testing facility in the eastern United States, according to their press release. They are USDA-compliant and certified by Florida to test hemp in the state and are now also certified to test medical cannabis products.

As a certified cannabis testing lab in Florida, ACS has to meet a list of requirements, similar to rules one might find in other legal states. The Florida rules mandate that labs are ISO-accredited and qualified to accurately test for contaminants, moisture content and cannabinoid potency.

Earlier this year, ACS acquired Botanica Testing, Inc., which added about 500 new hemp and CBD clients to their portfolio. ACS Laboratory now has customers in 44 states.

A Dank Opportunity: Private Equity in the Cannabis Industry & Compliance with the Securities Act

By Kayla Kuri
1 Comment

Under current federal law, financial institutions are extremely limited in the services and resources that they can offer to cannabis companies. Without access to traditional financing, cannabis companies have been forced to turn to outside investments to finance their operations. The private equity approach can be a “dank” opportunity for cannabis companies; however, these companies should be cognizant of the securities laws implications that are present with this type of business structure. The focus of most cannabis companies when forming their business is compliance with the regulatory scheme of their jurisdiction as it relates to the operation of a cannabis business. While compliance with these laws is important, it is also important that these companies ensure that they are compliant with the Securities Act of 1933 (the Securities Act) before accepting investments from outside sources.

Securities Act Application

Oftentimes, smaller companies don’t realize that they are subject to the Securities Act. However, the definition of a “security” under the Securities Act is very broad1 and under S.E.C. v. W.J. Howey Co., an investment in a common enterprise, such as a partnership or limited liability company, where the investor expects to earn profits from the efforts of others is considered a “security” and thus, subject to the rigorous requirements of the Securities Act.2 In general, all companies offering securities within the United States are required to register those securities with the Securities and Exchange Commission (SEC) unless a registration exemption is available.3 A company can register its securities (i.e., its ownership interests offered to investors) with the SEC by filing a Registration Statement. These statements generally offer investors certain information about the company in order to enable investors to be able to make an informed decision about their investment. Filing a Registration Statement can be both time-consuming and costly, and most companies want to avoid filing one if they can. Luckily, the Securities Act offers certain exemptions from registration requirements to companies who meet certain standards.4 While there are numerous exemptions from securities registration, the most common exemptions used are the Regulation D5 exemptions, which provides three different exemptions based on the size of the offering and the sophistication of the investors, and the Rule 1476 Intrastate exemption.

Regulation D Exemptions

Rule 504-Limited Offerings

Rule 504, often called the “Limited Offering” exemption, provides an exemption from securities registration for companies who limit the offer and sale of their securities to no more than $5,000,000 in a twelve-month period.7 Unlike the other Regulation D exemptions, which are discussed in further detail below, the Limited Offering exemption does not have any limitations on the level of sophistication or number of investors.8 This means that companies who rely on this exemption do not have to verify the net worth or income of their investors or limit the number of investors in the company. Like all Regulation D exemptions, companies relying on the Limited Offering exemption are required to file a “Form D” with the SEC within 15 days of the first securities sale.9 A Form D is a relatively simple form which provides basic information about a company to the SEC, including the registration exemption that is being relied upon. A copy of Form D can be found here.

Rule 506(b)

The “Private Offering” exemption can be found at Rule 506(b) of Regulation D.10 This exemption is commonly used for larger investment offerings with varying levels of investor sophistication. The Private Offering exemption can be used for investment offerings of any size so long as the company: (1) does not use general solicitation or advertising, such as newspaper articles or seminars, to attract investors; and (2) limits the number of “non-accredited investors” to no more than 35.11 “Accredited investors” are those investors whom the Securities Act deems sophisticated enough to properly weigh the risk of their investment in the company. In order to qualify as an accredited investor, the investor must:

  1. Have an individual income of more than $200,000 in the past two years
  2. Have a joint income with their spouse of more than $300,000 in the past two years
  3. Have an individual net worth, or joint net worth with their spouse, in excess of $1,000,000 or:
  4. Be a director, executive officer or manager of the Company.12

If the investor is a corporation, partnership, limited liability company or other non-trust entity, then to qualify as an accredited investor, it must either have assets in excess of $5,000,000 or each of its equity owners must meet one of the requirements for individuals listed above.13 If the investor is a trust, then the trust must: (1) have total assets in excess of $5,000,000 and the investment decision must be made by a “sophisticated person” (i.e., the person who is making the investment decision has such knowledge and experience in financial and business matters that he or she is capable of evaluating the merits and risks of an investment in the company); (2) have a trustee making the investment decision that is a bank or other financial institution; or (3) be revocable at any time and the grantor(s) of the trust must meet one of the requirements for individuals listed above.14

The Private Offering exemption allows a company to have an unlimited number of accredited investors, but only up to 35 non-accredited investors. However, companies should be very cautious of allowing non-accredited investors to invest in the company. The Securities Act requires that companies make extensive disclosures to non-accredited investors which are essentially the same requirements as the company would have to provide in a registered security offering. These requirements include providing investors with financial statements, operations plan, detailed descriptions of the company’s business, description of all property owned, discussion and analysis of the company’s financial condition and the results of operations, biographies of and descriptions of each officer and director, as well as other descriptions regarding the details of the company.15 Failure to provide the necessary information to non-accredited investors can disqualify companies from the benefits offered by the Private Offering Exemption. Companies should be very cautious when relying on the Private Offering exemption. If a company does choose to utilize the Private Offering exemption, they must file a Form D with the SEC within 15 days of the first securities sale.

Rule 506(c)

Rule 506(c), the “General Solicitation” exemption, is similar to the Private Offering Exemption. Unlike the Private Offering exemption, companies relying on the General Solicitation exemption are permitted to use general solicitation and advertising to advertise their securities to potential investors.16 However, investors relying on the General Solicitation exemption must only sell their securities to accredited investors.17 Under Rule 506(c), the company selling the securities must take steps to verify the accredited-investor status of their investors.18 These steps can include reviewing past tax returns, reviewing bank statements, or obtaining confirmation from the investor’s attorney or accountant that such person is an accredited investor.19 Like the other Regulation D exemptions, companies relying on the General Solicitation exemption should file a Form D with the SEC.Private equity can be a dank opportunity for cannabis companies, but it is critical that these companies ensure that they are in compliance with all applicable securities laws.

Intrastate Exemption

Rule 147, known as the “Intrastate” exemption, provides an exemption from securities registration for companies who limit the offer and sale of their securities to investors who are residents of, if they are an individual, or have its principal place of business in, if they are an entity, the state where the company is organized and has its principal place of business.20 The Intrastate exemption permits general solicitation to investors who are in-state residents, and there are no limitations on the size of the offering or the number of investors, whether accredited or unaccredited. In addition, companies relying on this exemption are not required to file a Form D with the SEC. The Intrastate exemption can be very desirable to companies who wish to obtain a small number of key investors within their communities.

State Requirements

In addition to complying with the Securities Act, companies are also required to comply with the securities laws of each state where their securities are sold. Each state has its own securities laws which may place additional requirements on companies in addition to the Securities Act. Most states (including California, Colorado, Oregon, and Oklahoma) require that a copy of the Form D filed with the SEC be filed with the state securities commission if securities are sold within that state. Before offering securities for sale in any state, companies should thoroughly review the applicable state securities laws to ensure that they are in compliance with all state requirements in addition to the requirements under the Securities Act.

Additional Considerations for Cannabis Companies

Despite the fact that the purchase and sale of cannabis is illegal under federal law, cannabis companies are still subject to the Securities Act in the same manner as every other company. However, the SEC has issued a warning to investors to be wary of making investments in cannabis companies due to the high fraud and market manipulation risks.21 The SEC has a history of issuing trading suspensions against cannabis companies who allegedly provided false information to their investors.22 Cannabis companies who wish to rely on any of the registration exemptions under the Securities Act should ensure that they fully disclose all details of the company and the risks involved in investing in it to all of their potential investors. While cannabis companies are permitted to rely on the registration exemptions under the Securities Act, the SEC appears to place additional scrutiny on cannabis companies who offer securities to outside investors. It is possible to fully comply with the onerous requirements of the Securities Act, but cannabis companies should engage legal counsel to assist with their securities offerings. Failure to comply with the Securities Act could result in sanctions and monetary penalties from the SEC, as well as potentially jeopardize a cannabis company’s license to sell cannabis. It is extremely important that companies seek advice from legal counsel who has experience in these types of offerings and the requirements of the Securities Act and applicable state securities laws. Private equity can be a dank opportunity for cannabis companies, but it is critical that these companies ensure that they are in compliance with all applicable securities laws.


References

  1. See 15 U.S.C § 77b(a)(1)
  2. 328 U.S. 293 (1946).
  3. 15 U.S.C § 77f.
  4. See 15 U.S.C § 77d.
  5. 17 CFR § 230.500.
  6. 17 CFR § 230.147.
  7. 17 CFR § 230.504.
  8. Id.
  9. Id.
  10. 17 CFR § 230.506(b).
  11. Id.
  12. 17 CFR § 230.501.
  13. Id.
  14. Id.
  15. 17 CFR § 230.502; 17 CFR § 239.90; 17 CFR § 210.8; 17 CFR § 239.10.
  16. 17 CFR § 230.506(c).
  17. Id.
  18. Id.
  19. Id.
  20. 17 CFR § 230.147.
  21. Investor Alert: Marijuana Investments and Fraud. (2018, September 5).
  22. Investor Alert: Marijuana-Related Investments. (2014, May 16).

Priorities During the Pandemic: How to Run a Lab Under COVID-19

By Dr. Peter Krause, Udo Lampe
No Comments

During the COVID-19 pandemic, most testing laboratories have been classified as relevant for the system or as carrying out essential activities for national governments. Therefore, it is crucial to maintain activities and optimally assess the changes that are occurring, framed within the spread of the SARS-CoV-2 virus. Analytica Alimentaria GmbH, a testing laboratory with its headquarters in Berlin, Germany and a branch office in Almeria, Spain, decided to focus its management on the analysis of events and the options available, at the legal and employment level, to ensure continuity of activities and reducing, as much as possible, the damage for the parties involved: employees and company. Accredited by the International Accreditation Service (IAS) to ISO/IEC 17025:2017, Analytica Alimentaria GmbH is required to implement risk-based thinking to identify, assess and treat risks and opportunities for the laboratory. Since March 12, 2020 a crisis committee was established, formed by the six members of the company’s management, covering general management, human resources, direction of production, finance and IT. The committee meets every day and it intends to:

  • Minimize the risks of contagion
  • Be able to continue providing the service required by our clients
  • ensure that the company as a whole will survive the economic impact of the crisis
  • Take measures that are within the legality of both countries where the laboratory operates (Spain and Germany),
  • Manage internal and external communication related to the crisis

To achieve correct decision making, daily meetings of the committee were established, to review the situations that were presented day after day and the actions that should be carried out. Each decision was analysed in a prioritized, objective, collaborative and global way.

The basis of the lab’s action plan was a well-developed risk assessment. In addition to the risk of getting a droplet or smear/contact infection with the coronavirus SARS-CoV-2 (risk I) by contact with other people, psychological stress caused by changing working conditions (home office), contact options and information channels were also identified (risk II).

As a result of the risk assessment, the conclusion was that a mix of various measures is the best form of prevention:

  • Keep distance
  • Avoid “super spreader” events
  • Personal hygiene
  • Regular communication between managers and personnel about the current situation and possible scenarios

The risk assessment took both areas into account. The following assessment was developed together with an external specialist and focused on risk I:

Risk I Assessment Protective measures / hygiene plan
Organisation
Working hours and break arrangements High Limit the gathering of people and ensure a minimum distance:

  • Relocated work, break and mealtimes
  • Create fixed groups of shift-working staff
  • Time gap of 20 min. between the shifts
  • Enable home office wherever it is possible
Third party access Moderate Few but “well-known” visitors:

  • Reduce the number of visits and keep internal contacts to a minimum
  • Ensure the contact chain
  • Inform visitors about the internal rules and obtain written consent
Dealing with

suspected cases

High Isolation and immediate leave of the company:

  • Contactless fever measurement (in case of typical symptoms)
  • Leave the company or stay at home
  • If the infection is confirmed, find contact persons (including customers or visitors) and inform them about a possible risk of infection
Contact with other persons
Traffic route from home to work Moderate Avoid public transportation:

  • Take a car, bicycle or go by foot
  • Enable mobile work and teleworking
At work High Always keep a sufficient distance of 2.0 m from people:

  • If minimum distances cannot be maintained, wear protective masks or install physical barriers (acrylic glass)
  • Organize traffic routes so that minimum distances can be maintained (one-way routes, floor markings indicating a distance of 2 m)
  • Use digital meetings instead of physical ones
Sanitary facilities Moderate Remove virus-loaded droplet as often as possible:

  • Provide skin-friendly liquid soaps and towel dispensers
  • Shorten or intensify cleaning intervals
  • Hang out instructions for washing hands at the sink
  • Include instructions for proper hand-disinfection
Canteens, tea kitchens and break rooms High One person per 10 m² = minimum:

  • Reduce the number of chairs per table
  • Informative signs in every room, indicating the maximum number of permitted persons
Ventilation High Diluting or removing bioaerosols (1 µm virus-droplets):

  • Leave as many doors open as possible
  • Regular and documented shock ventilation every 30 minutes or more frequently, depending on the size of window
  • Operate ventilation and air-conditioning systems, since the transmission risk is classified as low here
Use of work equipment Moderate Use tools and work equipment for personal use:

  • Regular cleaning with changing use (PC, hand tools, coffee machine, …)
  • If possible, use gloves when using equipment for a larger number of users
Protective masks Moderate
  • Use of protective masks as an additional measure, indicating that this does not replace keeping distance
  • Recommend wearing masks in commonly used areas and explain that they do not protect yourself, but help to protect others
  • Give clear instructions (written and oral) on how to use a mask correctly and explain the use and purpose of different mask-types
  • Distribute masks freely

A number of guidelines and concrete measures addressing the risks related to health issues are already in place. Those health issues in risk group II are more closely related to the psychological effects of the crisis, however, are also more complex to mitigate. The key strategy is communication and, in particular, actively listening to all employees of the company.

Analytica’s robust company culture, based on values established in coordination with the whole staff, has been of significant help during the crisis. The some 150 staff members are organized by over 22 team coordinators. During the crisis, active communication has been intensified significantly. The crisis management team set up regular alignment meetings with all the coordinators and with individual persons with particular situations. This way, not only was it possible to explain the development of the crisis and the subsequent measures, the conversations with coordinators were also the most important source of information enabling the appropriate decisions. The coordinators, closely aligned and in sync with management, were then able to communicate with their team members with a high degree of confidence. One outcome of the communication was a measure that proved very effective in fortifying trust within the company: all measures and evaluations, as well as a chronological review, are published in a dynamic internal report and are made available, with full transparency, to all staff members. Besides the many individual and group alignment meetings (usually held by video conference), this has been a key measure to establish confidence and security within the company.

On the other hand, the company made a great effort to balance the effect of the general closure of kindergartens and schools in Spain and Germany. Each case where staff members were required to care for children at home was studied individually and agreements were established, adapting shifts and making use of time accounts, to allow childcare at home without significant loss of income.

The success of the measures is shown by the continuous work of both laboratories during the crisis. Besides the personal tragedy of a possible infection, the identified risk to the company has the consequence of a (partial) quarantine due to an infected person in contact with the staff and the consequent loss of work-power which might lead, in extreme cases, to a closure of the laboratory. According to the governmental regulation in Germany, if an infection occurs (confirmed by the health department), contact persons cat. 1 (more than 15 min. contact face to face) are identified and sent to quarantine. Other contact persons, e.g. contact persons cat. 2 (same room without face to face) must be identified quickly with the collaboration of the infected person and notified and, if necessary, sent in quarantine. In this case, there is a confirmed emergency plan that maintains the laboratory’s ability to work, defining replacements and alternative work-flow strategies.

It has been part of our strategy to validate all our measures with the relevant guidance documents made available by the official competent institutions. The German Federal Office for Public Safety and Civil Protection (Bundesamt für Bevölkerungsschutz und Katastrophenhilfe) has published a guide, “Crisis Management in Companies, 9-point Checklist” especially for critical infrastructure companies in the CoVid-19 crisis.

Having been classified as a core business enterprise (Spain) and “relevant to the system” (Germany), we consider it important to use them as a reference to confirm our level of alignment with your proposal for crisis management.

An important effect, relevant to any leader in times of crisis, is that the confirmation of all points of such a checklist provides certain peace of mind regarding the question: Have we done everything we could?

Moving Towards Greater Competency in Cannabis Testing

By Ravi Kanipayor
No Comments

While legalization of recreational cannabis remains in a fluid state in the United States, the medical application of cannabis is gaining popularity. As such, the  diversification of  pharmaceutical and edible cannabis products will inevitably lead to increased third party testing, in accordance with Food and Drug Administration (FDA) mandates. Laboratories entering into cannabis testing, in addition to knowing the respective state mandates for testing procedures, should be aligned with Federal regulations in the food and pharmaceutical industries.

In 2010, the American Herbal Products Association (AHPA)1 established a cannabis committee with the primary objective of addressing issues related to the practices and safe use of legally-marketed cannabis and cannabis-related products. The committee issued a set of recommendations, outlining best practices for the cultivation, processing, testing and distribution of cannabis and cannabis products. The recommendations for laboratory operations sets some basic principles for those performing analysis of cannabis products. These principles, complementary to existing good laboratory practices and international standards, focus on the personnel, security, sample handling/disposal, data management and test reporting unique to laboratories analyzing cannabis samples.

As local and federal regulations continue to dictate medical and recreational cannabis use, many will venture into the business of laboratory testing to meet the demands of this industry. Thus, it is not surprising that cannabis producers, distributors and dispensaries will need competent testing facilities to provide reliable and accurate results. In addition, our understanding of cannabis from an analytical science perspective will derive from test reports received from these laboratories. Incorrect or falsified results can be costly to their business and can even lead to lawsuits when dealing with consumer products. Examples of fines and/or suspensions related to incorrect/false reporting of results have already gained coverage in news media. This sets up the need for the cannabis industry to establish standardized protocols for laboratory competency.

The international standard, ISO 17025 – ‘General requirements for the competence of testing and calibration laboratories’ – plays an important role in providing standard protocols to distinguish labs with proven quality, reliability and competency. The industry needs to rely not only on the initial accreditation received, but also on the ongoing assessment of the labs to ensure continuous competency.

Receiving accreditation involves an assessment by an International Laboratory Accreditation Cooperation (ILAC) recognized accrediting body, which ensures that laboratories have the competency, resources, personnel and have successfully implemented a sound quality management system that complies with the international standard ISO/IEC 17025:2017. This ISO standard is voluntary, but recognized and adopted globally by many industries for lab services. Cannabis companies can ensure that the test services they receive from accredited laboratories will meet the requirements of the industry, as well as the state and federal regulatory agencies. The International Organization for Standardization (ISO) is an independent, non-governmental organization with over 160 memberships of national standards bodies, and all with a unified focus on developing world-class standards for services, systems, products, testing to ensure quality, safety, efficiency and economic benefits.

ILAC is a non-profit organization made up of accreditation bodies (ABs) from various global economies. The member bodies that are signatories to the ILAC Mutual Recognition Arrangement (ILAC MRA) have been peer evaluated to demonstrate their competence. The ILAC MRA signatories, in turn, assess testing labs against the international standard, ISO/IEC 17025 and award accreditation. Accreditation is the independent evaluation of conformity assessment in accordance with the standard and related government regulations to ensure the lab carry out specific activities (called the ‘Scope’) impartially and competently. Through this process, cannabis industry stakeholders and end users can have confidence in the test results they receive from the labs.

Understanding the principles of accreditation and conformity to ISO standards is the beginning of the ISO 17025 accreditation process. Similar to other areas of testing, accreditation gives cannabis testing labs global recognition such that their practices meet the highest standards in providing continuous consistency, reliability and accuracy.

Many government agencies (state and federal) in the US and around the world are mandating cannabis testing laboratories to seek accreditation to ISO/IEC 17025:2017, in an effort to standardize their practice and provide the industry with needed assurance. Conformance with the standard enables labs to demonstrate their competency in generating reliable results, thereby providing assurance to those who hire their services.

Testing of cannabis can be very demanding and challenging given that state and federal regulations require that the performance and quality of the testing activities must provide consistent, reliable and accurate results. Hence, labs deciding to set up cannabis testing will have to take extra care in setting up a laboratory facility, acquiring all necessary and appropriate testing equipment, hiring qualified and experience staff and developing and implementing test methods to ensure the process, sample throughput, data integrity and generated output are continuously reliable, accurate and meet the need of the clients and requirements of the regulatory bodies. This demands the lab to establish and implement very sound quality assurance program, good laboratory practices and a quality management system (QMS).

Some expected challenges are:

  1. Standardization of test methods and protocols
    1. Since there is no federal guidance in standardization of test methods and protocols for cannabis testing in US, it is challenging for laboratories to research and validate other similar, established methods and gain approval from the local and state authorities.
  2. Facility
    1. Cannabis testing activities must be physically isolated from other testing activities for those labs conducting business in other areas of testing such as environment, food, mining, etc.
    2. Microbiological testing requires additional physical isolation within the testing facility, maintaining sterility of the environment, test area and test equipment.
  3. Equipment
    1. The test equipment such as Chromatographs (GC/LC), Spectrometers (ICP-MS, ICP-OES, UV-Vis), and other essential analytical instruments must meet the specifications required to detect and quantify and statistically justify the test parameters at the stipulated concentration levels. That means the limit of detection and limit of quantitation of each parameter must be well below the regulatory limits and the results are statistically sound.
    2. Calibration, maintenance and operation of analytical equipment must be appropriate to produce results traceable to international standards such as International System of Units and National Institute of Standards and Technology (SI and NIST).
  4. Staff
    1. The qualification and experience of the staff should ensure standard test methods are implemented and verified to meet the specifications.
    2. They should have a sound understanding of the QA/QC protocols and effective implementation of a quality management system which conforms to ISO/IEC 17025:2017 standard.
    3. Staff should be properly trained in all standard operating procedures (SOPs) and receiving schedule re-training as needed. Training should be accurately documented.
  5. QMS
    1. The QMS should not only meet the requirements of ISO 17025, but also be appropriate to the scope of the laboratory activities. Such a system must be planned, implemented, verified and continuously improved to ensure effectiveness.

Finally, stakeholders should seek expert advice in establishing a cannabis testing lab prior to initiating the accreditation. This can be achieved through a cyclic PLAN-DO-CHECK-ACT process. Labs that are properly established can attain the accreditation process in as little as 3-5 months. An initial ‘Gap Analysis’ can be extremely helpful in this matter.

IAS, an ILAC MRA signatory and international accrediting body based in California is one such organization that provides training programs for those interested in attaining accreditation to ISO/IEC 17025:2017. It is a nonprofit, public-benefit corporation that has been providing accreditation services since 1975. IAS accredits a wide range of companies and organizations including governmental entities, commercial businesses, and professional associations worldwide. IAS accreditation programs are based on recognized national and international standards that ensure domestic and/or global acceptance of its accreditations.2


References

  1. American Herbal Products Association , 8630 Fenton Street, Suite 918 , Silver Spring, MD 20910 , ahpa.org.
  2. International Accreditation Services, iasonline.org.

PJRFSI Accredited for Cannabis Certifications

By Cannabis Industry Journal Staff
No Comments

In a press release published, last week, Perry Johnson Registrars Food Safety, Inc. (PJRFSI) announced they are now officially the first certification body to be granted accreditation for cannabis certification in the United States by ANAB.

PJRFSI has developed a cannabis certification standard that uses GMP- and GAP-based scheme to help growers, manufacturers and retailers meet a wide range of different state regulations. The goal of the standard, according to the press release, is to provide guidelines for cultivation, manufacturing and retail best practices across the country.

Because each state has very different rules and requirements for cannabis companies, the certification requirements can be confusing and vary widely from state to state. With the release of this new standard, PJRFSI wants to simplify cannabis markets in the United States and hopefully get various states on a same or similar page.

According to Terry Boboige and Lauren Maloney, president and accreditation manager at PJRFSI respectively, they have a lot of hope for what the future holds in terms of unifying cannabis rules and requirements. “The team at Perry Johnson Registrars Food Safety Inc. is incredibly excited to be the first company in the United States to achieve formal accreditation for our Cannabis and Hemp Certification Program,” says Boboige and Maloney. “We believe this nationally-recognized program will help the budding cannabis and hemp industries to strengthen, legitimize, and separate themselves from companies that do not have formal certification. Certification to this standard will forever help enhance companies’ image, credibility, and reliability. Accredited certification exemplifies to the public that certified organizations who supply cannabis and hemp products and services have internal safety systems that can inspire confidence.”