Cultivation facilitiy

A Case for Compartmentalization: Problems with Perpetual Harvest Models in Cultivation, Part I

By Adam Koh
7 Comments
Cultivation facilitiy

Dividing a cultivation facility into multiple rooms allows for more control of plants’ lifecycles.

When newspapers and television run a cannabis story, it is frequently accompanied by photos or video of vast, cavernous warehouses filled with veritable oceans of plants. Photos used to illustrate stories in the New York Times and Denver Post serve to illustrate this point.

Cultivation facilitiy
Photo credit: Lawrence Downes

This type of facility design is sometimes referred to in the cannabis industry as a “perpetual harvest” model. This is because plants are harvested piecemeal – one row at a time, for example – with new plants ready to flower replacing the recently harvested ones. In this model, flowering plants of various ages occupy the same space and the room is never completely harvested and empty, hence the “perpetual” moniker. This is in contrast to more compartmentalized facility designs, in which flowering plants are segregated in smaller groups in various rooms, which are then harvested completely before the room is cleaned and new plants ready to flower replace the previous ones.

The perpetual harvest setup appears impressive and lends itself well to portraying the volume of production being achieved in large facilities. This is likely why I have seen such models, or similar ones, copied in other states. Prospective entrants to the industry have also approached my firm with such designs in mind for their cultivation facilities. However, we generally advise against the perpetual harvest facility model, as this type of design imposes serious difficulties upon operators. Problems arise primarily in the areas of pest and contamination mitigation, ability to properly observe pesticide use and worker safety guidelines, and inefficiencies in lighting and HVAC usage. The problems noted are linked to the perpetual harvest design and can be mitigated with increased compartmentalization. Before getting to my recommendations, however, lets run down the issues created by the perpetual harvest model.

AdamKohcultivation
Photo credit: Denver Post

Lighting and HVAC Inefficiencies

In many photos I see of perpetual harvest facilities, the ceilings are extremely high, as are the light fixtures in most cases. This is likely the result of one of the main perceived advantages of such spaces, which is that they require minimal construction prior to getting up and running. There are no walls to be put up or ceilings lowered, and the lack of compartmentalization makes running wires and ducting much easier.

However, whatever capital was saved in initial construction will likely be burned up by increased ongoing operational costs. High ceilings such as those in the above photos mean more cubic footage that climate control systems must cool or heat. Additionally, due to the great height of the light fixtures, plants are not getting the most bang for their buck, so to speak, compared to designs that allow lights to be lowered appropriately to provide optimal intensity and spectrum. Double-Ended High Pressure Sodium (DE HPS) lamps are probably the most common type of lighting in use for flowering by commercial cannabis cultivators today, and they are ideally situated about four feet above the canopy when running at full capacity.

For businesses aiming for a no-frills production model with minimal attention to the light management needs of individual cannabis cultivars (or strains, as they are commonly referred to), then this consideration may be moot. However, those operations attempting to produce the highest-quality flower and plant material know the value of proper light management, as well as the fact that some cultivars respond differently than others to intense light. Indeed, I have observed cultivars that produce more when light intensity was decreased, while others thrived under intense light that would have seriously damaged others. This makes the one-size-fits-all approach to light management I’ve seen in most perpetual harvest designs generally detrimental to the quality of the final product, in addition to using the same amount of energy, or more, to achieve that lower quality result.

Difficulties in Pest and Contamination Mitigation

Such a design makes it easy for a small pest incursion to become a full-blown infestation. Because plants about to be harvested are sharing space with plants just beginning their flowering process, this means that both current and future harvests will be affected, or even lost entirely if the pest problem is severe. Having plant groups of different ages share the same space is generally unadvisable. This is because older plants, particularly those close to harvest, are weaker and more susceptible to pests by virtue of the fact that their life cycles are nearing an end. On the other hand, a more compartmentalized facility design provides physical barriers that can contain mites and mildew spores to some extent, limiting the damage done by individual pest incursions.

One of the essential tasks in an indoor cultivation operation is sterilizing just-harvested spaces to ensure that the subsequent run gets off to a clean start. This task could conceivably be performed in a perpetual harvest model; say, for example, trays, trellis frames, and other equipment are scrubbed after a row has been cut down and removed for drying or processing. However, due to the fact that there are always other plants in the room, it seems impossible for any plant group to get an assuredly clean start, as other plants may be harboring bugs, mold spores, or viruses, despite not showing signs or symptoms. The presence of plants also eliminates the possibility of using cleaning agents such as bleach, which gives off harmful fumes, but is sometimes necessary to completely sterilize an area that might have previously experienced some amount of powdery mildew or botrytis.

In Part II of this series, I will discuss some problems with pesticide use and worker safety regulations as well as provide recommendations for compartmentalization in cultivation facilities. Stay tuned for Part II of A Case for Compartmentalization: Problems with “Perpetual Harvest” Models in Cultivation, coming out next week.

About The Author

Comments

  1. David J. Davis

    Your recommendations are spot on Adam. I am currently designing growing spaces within a 80,000 square foot facility. You can bet this building will be partitioned into several smaller individual grow rooms. Having our eggs in one basket is a formula for disaster. Of course I also apply a multi-tiered approach as well and do everything that I can to prevent harmful outbreaks from occurring ever. I look forward to your second installment.

    1. Brett Roper

      David … Please see my comment below noting you are correct in wanting to mitigate risk through the efficient use of cultivation space but in reality you will be adopting a perpetual or continual harvest model. – Brett

  2. Brett Roper

    It is unfortunate that the term ‘perpetual harvest’ is being used to somehow imply poor or even unsafe cultivation practice methods when it is generally accepted that the term only describes the difference between an outdated practice whereby cultivators used to grow one crop in one space, harvest the materials all at once, and then repeat the process as they could in what was generally referred to as a harvest operations model. A cultivator using a ‘perpetual harvest’ or ‘continual harvest’ process could be more accurately compared to the impact of the ‘assembly line’ on the automotive industry in that it now allows the efficient and safe cultivator the ability to harvest materials every day and better manage their cultivation so that they can throttle production up or down to meet market demand regardless of their individual preference of room or space size. The author certainly could be accurate in describing certain operations that appear to be less efficiently organized or more likely underfunded but in reality to somehow imply that cultivators using a perpetual harvest model indicates poor or unsafe practices is certainly not accurate. For example, using the authors underpinnings as represented to the extreme would a cultivator have one flower room for each day of the week that they harvest materials? I would suggest that such sizing offers a very inefficient use of environmental controls, light management, as well as other plant management objectives. Of course any cultivator that suggests that they do not have the occasional problem with pests, molds, and mildews should not be trusted as there is no perfect cultivation environment today that can offer the cost efficiency needed to be competitive in today’s ever evolving marketplace. Today’s efficient ‘perpetual or constant harvest’ operator is generally taking advantage of construction and environmental efficiencies to better manage their cultivation operation (inputs and outputs) so that they are focused on quality results that are underpinned to a culture of product safety, patient safety, and public safety and to somehow suggest that such cultivators using this method are not all of the above is certainly not an accurate statement. Sorry Mr. Koh but as a representative of a continual harvest cultivator in Denver I will have to disagree with the generalities of your observations and I strongly suspect when you were growing your 3,500 plants and overseeing 15 employees you were actually using a perpetual or continual harvest model’s methodology!

    1. Adam Koh

      Mr Roper, thanks for your detailed and informed comment. Let me begin my reply by saying that I am aware of the assembly line model you describe and did indeed employ it in my former position to productive ends. I think your issue with my piece is mainly one of terminology, which happens in this field since people employ different lingo in many cases to refer to the same thing, largely due to the newness of our industry. I understand that perpetual harvest is used by some to refer to the assembly line model, which is why I described what I was speaking about specifically (plants of different stages in the flowering process sharing the same space in a large open area that is never fully cleared out), and noted that it is “sometimes” referred to as a perpetual harvest model. I used the “perpetual” term specifically to address some recent regulatory discussions I have been involved in, in which state government employees were using the perpetual harvest name to describe the facility setup I’m describing. You are also right that over-compartmentalization can lead to inefficiency, that is a great point. While my next installment will contain some recommendations, I do state that the appropriate level of compartmentalization will depend on a number of factors. Hopefully this addressed some of the issues you raised, though again, I think it points mainly to a need for standardized terminology and nomenclature in our field to facilitate more effective communication. Thank you again for your substantive comment.

  3. Brett Roper

    Thanks Adam … Glad to know we are in agreement and that the term is more generic but applied to specific larger room designed environments can become inefficient. We should catch up sometime in the future … perhaps a tour of our facility here in Denver?

  4. Daniel Monk

    Great article, touched on some of the potential Inefficiencies and contamination issues. Also some very substantive comments! Thanks for the examples Brett, all very helpful in increasing my understanding of the topic. I am interested in part II of this article; I will be back.

Leave a Reply

Your email address will not be published. Required fields are marked *